Rehau PVC edgebanding, identified by manufacturer part 302254-289, provides a PVC edge treatment that covers and protects raw panel edges, giving casework and components a consistent finished look across a run of parts. The 15/16 inch width gives coverage across typical 3/4 inch panels with room to trim, supporting accurate flush trimming and a straight visual line along cabinet and furniture edges. The 1mm thickness establishes a defined edge profile that stands up to everyday contact while keeping routing and trimming predictable. The CP41033 designation identifies the specific color or design series, helping shops match this banding to corresponding panels or existing installations. A 600ft length supports longer production runs or multiple jobs from one roll, reducing changeovers during edgebander setup and keeping material continuity through a project.
The 15/16 inch by 1mm format gives installers a narrow tolerance window for alignment on common panel thickness, keeping the banding centered while allowing trim heads to remove slight overhang without cutting into the face. This dimensioning supports predictable setup on edgebanders where guide positions, pressure rollers, and trimming units are dialed in for 1mm PVC stock. The 600ft roll length allows continuous feeding through automatic edgebanding equipment on larger runs, lowering interruptions during cutting and gluing cycles. Because the material is PVC edge banding from Rehau, it integrates into workflows already tuned for PVC glue lines, trimming, and scraping, which helps maintain repeatable results from part to part.
The Rehau PVC edgebanding 302254-289 is suited to applications where a PVC edge finish is required on panel products such as cabinets, furniture components, or interior fixtures that use coordinated decorative surfaces. As a product classified as Edge Banding, it serves as the edge treatment in systems built around sheet goods, concealing exposed substrate and establishing a consistent edge appearance along doors, drawer fronts, shelves, and case sides. The CP41033 EMB LAC designation connects this banding to a particular color and texture family, which helps shops keep visual alignment between faces and edges when they are building within that specific design program. Using a dedicated part like 302254-289 allows repeat jobs or field replacements to match the same edge series, supporting continuity across multiple phases of a project or future service work.
The 15/16 inch width on this PVC edgebanding gives a workable margin beyond standard panel thicknesses, which simplifies centering at the edgebander and leaves enough material for top and bottom trimming without risking chatter into the panel face. The 1mm thickness sets a stable reference for trimming and scraping tools, so once machines are set for 1mm stock, operators can run parts confident that the cutter paths and pressure settings will behave consistently across the entire 600ft roll. That extended roll length supports longer uninterrupted production runs where every piece sees the same edge material, contributing to color and sheen consistency from the first part to the last. Because it is Rehau PVC edgebanding, it aligns with production environments already configured around PVC processing, helping maintain predictable glue bond behavior and trim quality.
The 15/16 x 1mm size describes the banding width and thickness, which guides edgebander setup and trimming, and helps match the banding to typical panel thicknesses used in cabinetry and furniture.
The 600ft roll length allows longer continuous runs on an edgebander, reducing roll changes and helping maintain consistent color, sheen, and edge appearance across multiple parts in a project.
The CP41033 EMB LAC designation identifies the specific decorative series, helping shops select this banding to align edge color and surface character with matching board or laminate programs.
The 1mm thickness provides a defined edge profile that works well with standard trimming and scraping tools, supporting controlled profiling and a uniform edge across all processed parts.
Rehau 302254-289, with its specific part number and CP41033 series, allows recurring jobs and later replacements to use the same edge appearance, supporting consistent visual results over time.
The 15/16 inch width provides slight overhang on typical panels, which gives space for flush trimming and helps maintain a straight, clean edge line along cabinet and furniture components.
The Rehau PVC edgebanding 302254-289 pairs a 15/16 inch width with a 1mm thickness and a 600ft roll format, giving shops a defined edge profile that runs efficiently through edgebanders. The CP41033 EMB LAC designation ties this banding to a specific decorative series, supporting color and design alignment with related surfaces. For woodworking professionals working within this Rehau program, choosing this dedicated part number helps keep edge details consistent from initial builds through future repeat work.
Sold In: 1 Roll