Rehau PVC edgebanding 302254-293 is a PVC edge banding designed to cover and protect raw panel edges, so exposed substrate is hidden and workpieces present a finished profile. The 15/16 inch width gives coverage across standard panel thicknesses with a margin for trimming, which helps installers align the banding while still allowing a crisp final edge. The 1mm thickness creates a substantial edge treatment that stands up to typical cabinet and woodworking contact, so finished parts maintain a consistent look along door, drawer, and shelf fronts. The CP40867 embossed lacquer surface provides a textured, lacquered finish that coordinates with matching surfaces, so edge profiles visually tie in with the face material. Supplied in a 600 ft length, this edgebanding supports longer production runs or multiple projects from a single product number, helping shops standardize on one edge solution.
The 15/16 inch by 1mm sizing on this Rehau PVC edge banding supports straightforward application along cabinet and panel edges because the width overhang gives working room for trimming while the thickness forms a defined edge. The CP40867 embossed lacquer finish means the visible edge has a pre-formed texture and lacquered appearance, so installers align the banding to match the panel face pattern and complete the edge in one operation. With 600 ft available under part 302254-293, shops can plan runs knowing the same material will be used from piece to piece, which supports consistent setup on edgebanders and repeatable visual results.
This Rehau PVC edgebanding, classified as edge banding in the edgebanding category, fits projects where raw engineered panel edges need coverage with a PVC profile that matches a CP40867 embossed lacquer surface. The 15/16 inch width works well on standard cabinet carcasses, doors, drawer fronts, and shelving edges where an overhang is preferred before trimming. Because the product is supplied as Rehau PVC edge banding with a specific manufacturer part number 302254-293, it serves shops standardizing on that code for repeat work or for matching existing jobs specified with the same designation. The 600 ft length supports use in cabinet shops, millwork operations, or serious DIY projects that anticipate multiple panels sharing the same edge treatment across a room or series of units.
The combination of 1mm thickness and CP40867 embossed lacquer finish means the edge profile has both physical body and a defined surface texture, so once bonded it presents a continuous look along the length of a cabinet run. The 15/16 inch width offers installers enough overhang on typical board thicknesses to align the banding without precision pre-trimming, reducing small alignment adjustments during application. Because this is PVC edgebanding from Rehau, Inc., the material characteristics and finish coding under 302254-293 remain consistent across the 600 ft length, which supports uniform settings on edge processing equipment for the full run. Using the same Rehau 302254-293 edgeband across related pieces also helps projects maintain color and texture alignment at every visible edge.
Rehau 302254-293 PVC edgebanding is 15/16 inch wide and 1mm thick, which provides edge coverage with trim allowance and a solid profile suitable for typical cabinet and panel edges.
The CP40867 embossed lacquer designation indicates an embossed, lacquered surface on the PVC edgebanding, giving the edge a textured, lacquer-like appearance that coordinates with matching finishes.
The 600 ft length of this Rehau PVC edge banding supports longer cabinet or millwork runs, so multiple parts can share the same material for consistent appearance and repeatable machine setups.
This PVC edgebanding suits cabinet, furniture, and general woodworking projects that use engineered panels and require a CP40867 embossed lacquer edge to match specified surfaces.
The 1mm thickness on this Rehau edgebanding creates a more substantial edge profile than thin tape, supporting a defined edge line on doors, drawer fronts, and shelves.
The 15/16 inch width provides slight overhang on standard panel edges, giving installers room to trim back to a flush edge without risking exposure of the core material.
Choose Rehau PVC edgebanding 302254-293 when a 15/16 inch by 1mm PVC edge with CP40867 embossed lacquer finish is specified, so cabinet and panel edges align visually with matching surfaces across a project. The 600 ft length under this manufacturer part number supports repeated use on related work, giving shops and serious DIY users a consistent edge solution ready for ongoing cabinet or woodworking runs.
Sold In: 1 Roll