Rehau PVC edgebanding, 302254-297, is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges on woodworking projects. The 15/16 inch width covers typical panel thickness with margin, so the edge can be trimmed back cleanly for a flush, professional look on cabinets or fixtures. The 1mm thickness gives the edge banding noticeable substance on the panel edge, supporting a defined profile when trimmed while remaining workable during application. The CP20729 designation identifies the specific decor and surface style, keeping finished runs visually consistent when you are matching existing work. An embossed lacquer surface adds texture and a lacquered finish, giving the PVC edgebanding a finished appearance suited to visible cabinet and furniture edges in shop or jobsite builds.
This Rehau PVC edgebanding, 302254-297, uses a 15/16 inch width, which provides extra coverage beyond standard panel thickness so the banding can be aligned, pressed, and then trimmed from both sides for a precise edge. The 1mm thickness creates a robust PVC edge banding layer that stands up to standard edgebander trimming and flush routing, giving the finished edge a defined profile that matches 1mm programs in your equipment. The embossed lacquer finish works with the CP20729 surface style to give a decorative face, so when the edgebanding is applied to cabinet or furniture components the edge appearance ties into the chosen decor across the project.
Rehau PVC edgebanding, 302254-297, is an edge banding in the Edgebanding product class, aligning it with common cabinet and furniture edge finishing tasks in woodworking. The 15/16 inch dimension spans typical engineered panel thicknesses, making it suitable for edging casework sides, shelves, and vertical partitions without exposing substrate after trimming. With its 1mm thickness, this PVC edge banding integrates into setups designed around 1mm programs, so cabinet components, door edges, and interior panels share a uniform edge thickness. The CP20729 identifier, paired with the embossed lacquer surface, defines a specific decor, so runs of doors, drawer fronts, and panels can carry the same appearance along every exposed edge. In a woodworking environment, this combination of defined width, thickness, and decor code supports consistent results on repeat jobs that specify this Rehau PVC edgebanding.
The 15/16 inch by 1mm size of this Rehau PVC edgebanding, 302254-297, gives installers a predictable amount of overhang for trimming, which supports clean, repeatable edges when using standard edgebanders and hand tools. Because the material is PVC, the edge banding responds in a consistent way under pressure and trimming operations, contributing to uniform edge quality across long runs. The embossed lacquer surface on this CP20729 edgeband introduces texture and a lacquered layer that visually finishes the edge once trimmed, so subsequent sanding of the panel face can blend smoothly to the edge without altering the decor. A 600 ft run length means a single coil serves extended cabinet or fixture production, supporting continuous setup on an edgebanding machine and helping maintain identical appearance and performance from the first panel to the last in the sequence.
Rehau PVC edgebanding 302254-297 is 15/16 inch wide and 1mm thick, so it covers typical panel edges with trim allowance and matches setups designed around 1mm edge banding programs.
The CP20729 designation identifies the specific decor and surface style of this Rehau PVC edgebanding, helping match color and texture across panels using the same code.
The embossed lacquer finish on this PVC edge banding adds surface texture and a lacquered appearance, giving visible cabinet and furniture edges a finished, decorative look.
This Rehau PVC edgebanding is 1mm thick, so it aligns with machines and workflows configured for 1mm edge banding thickness on cabinet and furniture components.
The 15/16 inch width gives overhang beyond panel thickness, allowing the edgebanding to be trimmed back from both faces for flush, clean panel edges after processing.
The 600 ft length provides extended continuous Rehau PVC edgebanding, supporting longer production runs with fewer changeovers in a woodworking shop environment.
Choose Rehau PVC edgebanding, 302254-297, when a 15/16 inch by 1mm PVC edge banding with CP20729 embossed lacquer decor matches your cabinet or furniture program. The defined dimensions, surface style, and 600 ft length support consistent, repeatable edge finishing on woodworking projects.
Sold In: 1 Roll