Rehau PVC edgebanding 302254-298 15/16 x 1mm

Rehau PVC Edgebanding 302254-298 For Clean Edges

Rehau PVC edgebanding 302254-298 is a PVC edge banding from Rehau, Inc. that provides a defined edge treatment for panels in woodworking and cabinet projects where a PVC finish is specified. The 15/16 inch width covers typical panel thicknesses while leaving a small margin to trim, which supports a flush, professional-looking edge after processing. The 1mm thickness provides a substantial PVC layer on the edge, giving the installer material to work with during routing and finishing. The CP60220 designation and embossed lacquer surface describe a specific decorative and protective finish, which allows this edgebanding to match projects built around that finish system. Supplied as a continuous 600 foot length, it supports longer production runs or multiple jobs from a single product reference without frequent changeovers. The Rehau 302254-298 manufacturer part number keeps this particular color and finish combination easy to identify in ordering and shop documentation.

Key Rehau PVC Edgebanding Details For Projects

• The Rehau, Inc. branding identifies this as a Rehau PVC edge banding, which helps shops align it with established Rehau programs and specifications when planning panel processing or documenting materials on a job.
• The 15/16 inch width listed in the 15/16X1MM CP60220 EMB LAC designation gives coverage beyond standard panel thickness, allowing for trimming and flush finishing along the panel edge during fabrication.
• The 1mm thickness in the description defines the material depth at the edge, supporting machining operations such as edge trimming and light profiling while maintaining a consistent PVC surface on the finished workpiece.
• The CP60220 EMB LAC finish code calls out an embossed lacquer surface, so this specific edgebanding is suited to projects that are designed around that texture and sheen combination for coordinated components.
• The 600FT length in the SAP description identifies this product as a long-run roll, which supports continuous edging on multiple panels and reduces downtime related to roll changes in production environments.

Edgebanding Dimensions That Support Straightforward Use

The 15/16X1MM dimension in the SAP description defines both the width and thickness of this Rehau PVC edgebanding, giving installers a clear match for edge coverage and machining expectations. The 15/16 inch width allows modest overhang on common panel sizes, which is helpful when trimming back to a clean edge. The 1mm thickness establishes the amount of PVC available for edge finishing processes such as flush trimming, slight chamfering, or light sanding at the edge. Because these dimensions are fixed for the 302254-298 part, shops can set up equipment once for this banding and repeat runs with predictable results, which supports consistent edges across cabinets, shelving, or other panel-based assemblies.

Using Rehau 302254-298 Edgebanding In Shop Work

Where This Rehau PVC Edgebanding Fits Best

This Rehau PVC edgebanding 302254-298 belongs in woodworking and cabinet projects that call for a 15/16 inch wide, 1mm thick PVC edge treatment with a CP60220 embossed lacquer finish. The width works with panel constructions where the board thickness plus small overhang is desired, supporting post-trimming to a tight, uniform line along the edge. The 1mm thickness suits situations where a solid-feeling PVC edge is preferred over thinner tapes, which is valuable on exposed cabinet fronts, shelves, and similar parts. Because it is classified as Edge Banding under the Miscellaneous|Edgebanding category, it integrates naturally into panel-based assemblies where raw board edges need to be covered with a coordinated decorative and protective surface. The Rehau branding helps align this material with other Rehau surfaces that may be present in the same project.

Details That Support Repeatable Edgebanding Results

The clearly defined 15/16X1MM dimension on the SAP description helps shops set up edgebanders and trimming tools consistently for this specific Rehau PVC edge banding. By working with a known 15/16 inch width, operators can position guides and cutters to remove overhang without cutting into the face material, which supports smooth runs and reduces rework. The 1mm thickness gives a stable amount of PVC for trimming operations, so the edge can be processed while retaining a solid band of material on the panel. The CP60220 EMB LAC description identifies an embossed lacquer finish, helping maintain a consistent look when panels, doors, and other components share this surface. The 600FT roll length also supports repeatable results across multiple pieces, because one continuous run of material helps keep color and finish consistent from part to part.

Common Questions About Rehau PVC 302254-298

Select Rehau PVC Edgebanding 302254-298 For Defined Edges

The Rehau PVC edgebanding 302254-298 from Wurth Baer Supply combines a 15/16 inch width, 1mm thickness, and CP60220 embossed lacquer finish for controlled panel edge treatment. With a 600FT length and a clear manufacturer part number, it supports organized, repeatable edging across multiple woodworking or cabinet jobs. For projects that specify this color and finish combination from Rehau, this edge banding gives a consistent way to bring raw panel edges in line with the finished surfaces on visible components.