Rehau PVC edgebanding 302254-300 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects get a finished look instead of exposed core material. The SAP description 15/16X1MM CP60187 EMB LAC 600FT identifies this as an edgeband sized for panels where a 15/16 inch wide, 1mm thick strip gives full edge coverage with a controlled reveal. That sizing supports consistent visual lines along cabinet sides, tops, and shelves when panels are cut accurately. The CP60187 EMB LAC designation identifies an embossed lacquer design, which provides a specific texture and surface treatment that affects how the edge looks and feels in the finished installation. The 600FT notation indicates a 600 foot length, which supports longer production runs and fewer coil changes on repetitive cabinet or fixture jobs.
The 15/16X1MM CP60187 EMB LAC designation shows that this Rehau PVC edgebanding is designed with both coverage and handling in mind, so edge application can be set up around a known width and thickness. The 15/16 inch width gives working room at the edge that suits common casework and cabinet panel builds, supporting clean trimming without exposing the substrate. The 1mm thickness means the strip has body for edgebanders and trimming tools while keeping the edge profile controlled on doors and shelves. The CP60187 EMB LAC embossed lacquer surface defines how the edge will present once bonded, so finish planning for a run of cabinets or fixtures can be aligned to that specific texture and look.
The Rehau PVC edgebanding, 302254-300, is positioned in the Miscellaneous|Edgebanding category as an edge banding product, so it serves as the finishing material for exposed panel edges in woodworking projects. The 15/16 inch width works along edges where a near-1-inch strip lets fabricators cover the full thickness of a panel and have material available for trim passes, which is useful on case sides, cabinet tops, bottoms, and shelves. Because it is a PVC edge banding, it suits applications where a PVC edge is preferred for the look tied to the CP60187 EMB LAC specification. The 600FT length in a single run supports shops cutting and edging multiple components from the same coil, helping keep visual continuity when several cabinets or fixtures share the same edge treatment across a project.
The clearly defined 15/16X1MM sizing on this Rehau PVC edge banding allows machine setups to be dialed to a known strip width and thickness, which supports repeatable trimming results from panel to panel. With 1mm thickness, the material offers a predictable edge that responds consistently under trimmers and routers, helping control the feel and line of the finished corner. The CP60187 EMB LAC embossed lacquer description indicates a specific surface style, so finishing teams can align surrounding components to that texture and sheen for a unified appearance. The 600FT length reduces the number of coil changes needed during production, limiting interruptions that might otherwise introduce visual shifts between different edging runs. The manufacturer part number 302254-300 anchors the exact product selection, which matters when future replacements or add-on cabinets must visually align with earlier work.
The 15/16X1MM size indicates a 15/16 inch wide, 1mm thick strip, giving coverage for typical panel edges and material for flush trimming to a clean, consistent line.
The CP60187 EMB LAC designation identifies an embossed lacquer surface, so the edging presents a specific texture and sheen that guides finish matching on cabinets and fixtures.
The 600FT length supports longer production runs from a single coil, helping maintain edge consistency and reducing downtime from frequent roll changes during repetitive work.
The 1mm thickness provides enough body for machining while keeping the edge profile controlled, so trimmed panels have a defined yet manageable edge line.
The manufacturer part number 302254-300 serves as the exact Rehau reference, helping shops specify and reorder the same edgebanding for matching future work.
Rehau 302254-300 is a PVC edge banding in the edgebanding product class, used to cover and finish raw panel edges in woodworking and cabinet projects.
The Rehau PVC edgebanding, 302254-300, combines a 15/16 inch width, 1mm thickness, and CP60187 EMB LAC surface in a 600FT run, giving shops a defined edge profile and appearance for cabinet and furniture work. With a single manufacturer part number tying those traits together, it supports consistent results across current projects and future additions that depend on the same edge look. Select this Rehau PVC edge banding when a PVC edging with this specific size and embossed lacquer design is required for panel edges in your woodworking workflow.
Sold In: 1 Roll