Rehau PVC edgebanding is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, so cabinet and furniture projects gain a finished look and a defined edge line on visible sides. The 15/16 inch width gives coverage across standard board thicknesses plus a small overhang, which supports trimming for a tight, flush edge without gaps. The 1mm thickness provides a noticeable edge profile that stands up to normal use while still trimming cleanly with common edgebanding tools. The CP20726 LAC identification ties this material to a specific color and finish series, helping shops match existing runs on repeat jobs. The 600 ft length supports longer production runs or multiple smaller projects from a single roll, so shops can run more parts before changing material. The Rehau, Inc. branding identifies this as part of a dedicated edge banding product class for woodworking applications.
The 15/16 x 1mm size on this Rehau PVC edgebanding aligns with common edgebander settings, so operators can set guides and trimming units for a modest overhang and then cut back to a clean edge. The 1mm thickness works with standard edgebander heat, pressure, and trimming parameters, which supports repeatable application across similar projects. The defined width also lets shops plan for both manual and automatic trimming steps, because the slight excess beyond panel thickness can be removed to leave a straight, uniform edge along the full length.
The Rehau PVC edgebanding designated as 302254-312 is part of an edge banding product class for panel-based woodworking, so it suits projects built from sheet goods where exposed edges need coverage. The 15/16 inch width lets it span edges on cabinets, shelving, or casework panels that rely on standard thickness boards, which supports consistent edge treatment across an entire job. Because the material is PVC, it works within shop environments that already process PVC edgebands on their equipment, keeping handling similar from one project to the next. The CP20726 LAC notation gives a specific appearance reference, so it can be selected for work that calls out that exact identification in drawings or material lists. The 600 ft roll length supports production in small to mid-size runs where a single lot of edgebanding is used to keep color and surface appearance consistent across all pieces in the order.
The 1mm thickness of this Rehau PVC edgebanding provides enough material at the edge for a defined profile after trimming, which helps projects maintain a finished look when doors, drawer fronts, and panels align. That same thickness allows edgebanders and trimmers to cut without excessive deflection, supporting straight edges and reducing the risk of undercutting into the substrate. The 15/16 inch width creates a controlled overhang on both faces of the panel, which gives installers room to adjust trimming passes while still ending with a flush surface. The 600 ft length on a single roll means that once an edgebander is dialed in, many parts can be run under the same settings, supporting consistent edge quality throughout that run. The clear product identifiers 302254-312 and CP20726 LAC help shops reorder the same material for future jobs, which keeps follow-up parts visually aligned with previous work using this edgebanding.
Rehau 302254-312 PVC edgebanding is 15/16 inch wide, so it covers common panel thicknesses with extra material for trimming to a flush finished edge.
This Rehau PVC edgebanding is 1mm thick, providing a solid edge profile that trims cleanly and supports a consistent finished look across cabinet and panel edges.
The CP20726 LAC designation identifies a specific color and surface reference, helping shops match this edgebanding to projects that specify that exact identification.
The Rehau 302254-312 edgebanding is supplied in a 600 ft length, supporting extended production runs or multiple projects using the same material reference.
This PVC edge banding is suited to panel-based woodworking such as cabinets, shelving, and casework where exposed sheet-good edges need a finished appearance.
The 302254-312 edge banding is manufactured by Rehau, Inc., as part of their dedicated edge banding product line for woodworking applications.
The Rehau PVC edgebanding 302254-312 pairs a 15/16 inch width with 1mm thickness, giving shops a practical match for covering exposed panel edges with a trim-ready overhang. The CP20726 LAC identification and 600 ft length support repeatable results across production runs where a consistent color reference and continuous material feed matter. For panel-based woodworking that calls for this specific Rehau, Inc. edge banding, this product aligns sizing, designation, and run length for straightforward selection.
Sold In: 1 Roll