Rehau PVC edgebanding 302254-316 provides a PVC edge banding solution that finishes exposed panel edges, so cabinet and casework projects present a clean, professional boundary instead of raw substrate. The product is identified as PVC edgebanding in the edge banding product class, which means it is designed to cover and protect the edge of sheet materials during everyday use. The 15/16 inch width recorded in the description allows the banding to span typical panel thickness with slight overhang, giving room for trimming flush after bonding for a precise finish line. The 1mm thickness noted in the SAP description yields a solid edge profile that can be machined, trimmed, and detailed without feeling overly thin at the corner. The CP20856 LAC reference in the SAP description distinguishes this specific design within Rehau offerings, helping shops match prior installations or maintain consistency across a run.
The 15/16 inch width noted in the SAP description gives installers extra coverage beyond nominal panel thickness, which allows trimming tools to remove slight overhang and leave a tight, straight edge line. The 1mm thickness specified in the description defines how this banding will sit on the edge, giving a measurable profile that pairs well with standard edge trimming and scraping processes. The 600ft length listed in the SAP description means the banding can run across many cabinet components in one coil, which supports setup efficiency when feeding edge-banding machinery or planning repeat runs.
This product is classified as edge banding in the miscellaneous edgebanding category, so it is intended for use on furniture, cabinetry, and similar panel-based assemblies where exposed edges need a finished appearance. The PVC designation in the product name and class points it to environments where thermoplastic edging is standard, such as laminate or board-based casework. The 15/16 inch width from the SAP description suits work on panels around that thickness range, giving coverage that accommodates panel tolerances and minor alignment shifts. The 600ft length described in the SAP data lends itself to shop production or multi-piece projects, where one coil can serve doors, drawer fronts, and cabinet sides in a single material choice.
The 1mm thickness specified in the SAP description sets a predictable edge profile that trimming and finishing tools can follow, which helps produce repeatable results from part to part. Being identified as PVC edgebanding in the product class means the material is suited to typical PVC edging processes, allowing installers to align feed speed and trimming tools to a known profile. The CP20856 LAC reference in the SAP description uniquely identifies this variant, supporting consistent replacement when repeating a job or extending an existing installation. The Rehau, Inc. brand named in the product data links the banding to a single manufacturer, which simplifies reordering the same specification when a project calls for matching color and profile over time.
Rehau 302254-316 edgebanding is identified as PVC edgebanding in the edge banding product class, so it is intended to finish and protect exposed edges on panel-based components.
Rehau PVC edgebanding 302254-316 has a 15/16 inch width stated in the SAP description, providing slight overhang for trimming to a clean finished edge on suitable panels.
This Rehau PVC edge banding is 1mm thick according to the SAP description, giving a defined PVC profile that works well with common edge trimming and finishing tools.
The Rehau edgebanding roll 302254-316 is described as 600ft in length, supporting multi-part cabinet or furniture runs from a single continuous coil.
The 302254-316 PVC edgebanding is associated with Rehau, Inc. in the product data, linking this edge banding to that specific manufacturer for consistent sourcing.
The CP20856 LAC code appears in the SAP description as part of the 15/16x1mm reference, distinguishing this particular Rehau PVC edgebanding variant for identification and reordering.
The SAP description lists this Rehau PVC edgebanding as 15/16x1mm CP20856 LAC 600ft, giving clear size and identification details for project planning. The edge banding product class confirms its role as a finishing material for panel edges. For cabinet shops and serious DIY users needing a defined 1mm PVC profile in a 15/16 inch width over a 600ft run, this 302254-316 part number offers a repeatable specification to match across multiple components.
Sold In: 1 Roll