Rehau PVC edgebanding 302254-327 is a PVC edge banding designed to finish exposed panel edges on woodworking and cabinet projects. The SAP description "15/16X1MM CP40690 LAC 600FT" identifies this as a 15/16 inch wide, 1mm thick edgebanding supplied in a 600 foot length, which supports long runs on production jobs without frequent coil changes. The material is PVC, so the banding forms a durable edge layer along the substrate, helping protect the panel edge during everyday use. The width of 15/16 inch gives coverage over standard panel thickness with a small overhang for trimming, allowing a clean flush finish after edge processing. The 1mm thickness provides a defined edge profile that stands up to typical cabinet handling while still working well with common edgebanding equipment on shop floors.
This Rehau, Inc. PVC edgebanding is identified as 15/16X1MM in the SAP description, so it is sized to cover standard panel edges with some margin for trimming after application. The 1mm thickness means the banding presents a noticeable yet manageable edge layer for routing and scraping operations, which helps installers achieve a clean transition from edge to face. The 600FT reference indicates a continuous length that suits production environments where multiple parts draw from the same roll, supporting consistent setup on edgebanding machines. As an edge banding product in the Edgebanding category, it is intended for use on exposed panel edges rather than as a structural component, so it fits naturally into typical cabinet and casework workflows.
This product is classified as Edge Banding in the Edgebanding category, so it is applied to the exposed edges of panels in woodworking and cabinet projects. The 15/16 inch width suits common panel constructions, giving coverage over the edge so the substrate is concealed once trimmed. In cabinet production, that lets fabricators run parts through edgebanding equipment and then trim or scrape the overhang to match the panel face. The 1mm thickness works well where a defined, slightly thicker edge is desired, such as on cabinet doors, shelves, and case sides, providing a sturdy edge profile. Because the SAP description lists a 600 foot length, the coil supports multi-part runs like full kitchens or commercial casework where many edges share the same finish. That length helps maintain visual continuity across all banded components on the job.
The defined 15/16 inch width and 1mm thickness give installers predictable dimensions to set up trimming, scraping, and routing tools, which supports repeatable edge quality from part to part. Having the banding in a 600 foot roll reduces interruptions on edgebanders, so feed speeds and heat settings can stay consistent throughout a run, helping the finished edges match in appearance. The PVC material provides a uniform edge surface, letting cutting tools engage the same material along the full length of the panel, which contributes to smooth cuts and reduces edge variation. The manufacturer part number 302254-327 and SAP description 15/16X1MM CP40690 LAC 600FT provide a clear identifier when a shop needs the same size and type for future projects, supporting accurate reordering and consistent results across repeat installations.
The Rehau PVC edgebanding 302254-327 is described as 15/16X1MM, so it provides 15/16 inch width and 1mm thickness, giving coverage and trim allowance on typical panel edges.
The 1mm thickness creates a more substantial edge layer, which supports a defined profile and helps the banding handle normal cabinet use while still processing well on shop equipment.
The 600 foot length allows extended production runs from a single roll, which limits changeovers and helps keep machine settings stable for consistent edge appearance.
This Rehau PVC edge banding is categorized as Edge Banding for woodworking, so it is intended for finishing exposed panel edges on cabinet and similar panel-based projects.
The 15/16 inch width covers standard panel thickness with some overhang, allowing installers to trim back to a flush, clean edge without revealing the substrate.
The manufacturer part number 302254-327 and SAP description 15/16X1MM CP40690 LAC 600FT identify this specific Rehau PVC edgebanding for accurate selection and reorders.
This Rehau PVC edge banding, identified as 302254-327 with a 15/16X1MM CP40690 LAC 600FT description, offers a 15/16 inch wide, 1mm thick PVC solution for finishing exposed panel edges. The 600 foot length suits production and repeat work where consistent edges across multiple parts are important. For shops and installers who need a clearly identified PVC edgebanding size and format for cabinet and panel jobs, this product provides the defined dimensions and roll length to support predictable processing and matching results on current and future projects.
Sold In: 1 Roll