Rehau PVC edgebanding 302284-076 is a PVC edge banding designed to finish exposed edges on panels so cabinet, furniture, or fixture projects present a clean, professional look. The 15/16 inch width covers typical 3/4 inch panel edges with margin, which gives room to trim flush without exposing core material on standard sheet goods. The .018 inch thickness provides a low-profile edge, which helps maintain a slim edge detail on doors, drawer fronts, or shelves where a light edge is preferred. The C100163 LAC reference identifies the specific design and finish, which helps match this edgebanding to corresponding laminated or coated surfaces in coordinated jobs. The 600FT length is suited to production or multi-piece runs, which supports continuous edging on a series of parts without frequent changeover during fabrication.
This Rehau PVC edge banding uses a 15/16 inch by .018 inch format, which suits typical 3/4 inch panel edges where a slight overhang is trimmed back for a flush finish. The extra width supports both straight and slightly radiused edges, helping fabricators maintain coverage during trimming. The .018 inch thickness responds well to common edge banding trimmers, which supports smooth passes without removing excessive material from the panel face. The defined dimensions assist in setting up machines or hand tools so feed pressure, trimming depth, and edge clean-up are repeatable from part to part.
The Rehau PVC edgebanding, listed under product name Rehau PVC Edgebanding, 302284-076, is suited to covering exposed edges on casework, furniture components, or similar panel-based assemblies where a PVC edge is specified. The 15/16 inch width described in the SAP information, 15/16X.018 C100163 LAC 600FT, lets installers work with standard panel layouts while retaining some lateral tolerance during application. That extra margin helps when edging doors, sides, or shelves that may vary slightly from nominal sheet size, supporting full coverage along the length of the edge.
The .018 inch thickness noted in the same description keeps the edging relatively thin, which is useful where the goal is to minimize the visible transition between face material and edge. This thickness supports typical trimming and light profiling without creating a bulky edge, which is helpful on fronts and narrow parts. The C100163 LAC identification points to a specific decorative and performance profile within the Rehau range, which helps maintain consistent appearance across multiple items on the same job. The 600FT format is suited to shop or site work that involves numerous parts, supporting extended edging without interruption across cabinet runs or furniture sets.
The defined 15/16 inch width gives a predictable overhang on 3/4 inch stock, which allows fabricators to standardize trimming setups for both straight-line and contour applications. That predictability reduces adjustments between batches, which supports steady throughput on repetitive components. The .018 inch thickness interacts predictably with common edgebanding trimmers and scrapers, which helps operators control cut quality and avoids overly aggressive material removal at the panel face.
The consistent PVC composition described in the product class Edge Banding and category Miscellaneous|Edgebanding means every section of the strip behaves the same under heat and mechanical trimming, which supports clean edges across varied part sizes. The specific manufacturer part number 302284-076 gives a clear reference when aligning this edgebanding with panel stock specified on drawings, which simplifies reordering for repeat projects. The 600FT length referenced in the SAP description lets an installer or shop run long edges on multiple cabinets or fixtures in sequence, which supports efficient nesting of workpieces and limits downtime associated with switching to another edge material mid-run.
Rehau PVC edgebanding 302284-076 is described as 15/16X.018, meaning it provides 15/16 inch width and .018 inch thickness for edging typical 3/4 inch panels with trim allowance.
The 15/16 inch width extends beyond 3/4 inch edges, giving extra material to trim flush. This helps cover slight panel variation and supports a clean finished line.
The .018 inch thickness provides a relatively thin edge, which keeps the transition between face and edge subtle and works well with standard trimming tools.
The C100163 LAC reference in the SAP description identifies a specific design and finish, helping match this PVC edgebanding to corresponding panel surfaces.
The 600FT length supports longer production runs, letting installers edge many cabinet or furniture parts consecutively without switching to another strip.
This Rehau 302284-076 product is classified as Edge Banding in the Miscellaneous|Edgebanding category, indicating its role as a PVC edging material for panel work.
Rehau PVC edgebanding 302284-076 combines a 15/16 inch width, .018 inch thickness, and 600FT length to support steady edging on panel projects. For cabinet, furniture, or fixture runs using this defined finish, choose this Edge Banding format to keep edges uniform across your work.
Sold In: 1 Roll