Rehau PVC edgebanding 302284-634 is a PVC edge banding designed to finish exposed edges on panels so projects present a uniform, professional appearance. The 15/16 inch width covers typical panel thicknesses while giving a small margin, which helps installers trim flush without exposing the substrate. The .018 inch thickness keeps the edge low profile, so doors and panels close cleanly where clearances are tight. The C100251 designation identifies the specific color or pattern family, which matters when matching existing components on a job. This Rehau, Inc. edgebanding is supplied in a 600 ft length that supports longer production runs or multiple cabinets from a single roll, which reduces changeovers during fabrication. As an edge banding product in the edgebanding category, it is suited to closing off raw edges on wood products, helping shops deliver consistent results across repeated parts.
The 15/16 inch width of this Rehau PVC edgebanding gives coverage beyond standard panel thickness, which helps edge banding machines track the tape while still leaving material for final trimming. The .018 inch thickness keeps the edge modest, which works well where parts need to move past each other without interference, such as paired doors. The 600 ft length means fewer roll changes over the course of a shift, which reduces interruption on jobs requiring many identical edges. As an edge banding product under part number 302284-634, it fits into workflows that rely on clearly labeled materials for repeat orders and replacement work.
This Rehau PVC edge banding belongs to the edgebanding class, which positions it for closing raw edges on wood products in woodworking environments. The 15/16 inch width is sized for edges on panels near three-quarters of an inch thick, which is common in cabinet carcasses and shelving, so one product can service many parts within a project. The C100251 designation ties the banding to a consistent visual series, which helps when building out additional cabinets or panels to coordinate with prior work. With a 600 ft roll, this edgebanding supports runs covering many linear feet of panel edges, which suits small production shops that cut multiple identical components for casework, fixtures, or storage pieces.
The .018 inch thickness of this PVC edgebanding defines how the edge builds out from the substrate, which affects how cleanly trimming tools cut the profile and how seams appear at corners. The 15/16 inch width leaves a manageable overhang on both faces of a typical panel, which allows trimming tools to work within a predictable range and helps operators hold the same settings across batches. The clear identification as Rehau PVC edgebanding, 302284-634, supports repeat ordering of the same material, which helps maintain uniform color and texture across replacements or extensions to an existing installation. The 600 ft length supports planning edge-banding passes so that large sets of parts can be processed in a single sequence without frequent material changes.
Rehau PVC edgebanding 302284-634 is 15/16 inch wide and .018 inch thick, which suits edges on panels around common cabinet thicknesses while keeping the applied edge relatively slim.
This Rehau PVC edge banding is specified at 600 ft in length, which supports extended runs on edge banding equipment without frequent roll changeovers during cabinet or panel production.
The Rehau 302284-634 edgebanding is identified as PVC, which aligns with standard PVC edge banding processes used in many woodworking and cabinet shops.
The C100251 code is part of the edgebanding description, indicating a defined appearance series that helps match this PVC edgebanding to corresponding finishes in related work.
The .018 inch thickness keeps the edge banding relatively thin, which helps doors, drawers, and panels maintain tight operating clearances after the edge has been trimmed flush.
The 600 ft length lets shops process many linear feet of edges in sequence, which supports efficient runs on repetitive cabinet or shelving projects using the same material.
The Rehau PVC edgebanding 302284-634 pairs a 15/16 inch width with a .018 inch thickness to support clean, low-profile edges on common panel builds. The 600 ft length and clearly defined C100251 appearance code help shops handle repeatable runs and follow-up work using matching material. For woodworking and cabinet projects that rely on consistent edges across many parts, this Rehau, Inc. PVC edge banding provides a clearly identified option that fits established PVC edgebanding workflows.
Sold In: 1 Roll