Rehau PVC edgebanding gives cabinet and casework builders a dedicated edge material from Rehau, Inc. The 302474-032 designation ties this roll directly to the manufacturer part number, so shops can match jobs and repeats with the same material every time. The edge banding falls under the Edge Banding product class, which keeps it focused on capping exposed panel edges rather than acting as a general trim. The SAP description identifies a 15/16 x 1mm profile labeled C100019 EMB LAC 600FT, describing a PVC band sized for common panel thicknesses in one continuous length. The PVC construction defines it as a synthetic edge solution rather than wood, aligning it with typical cabinet and furniture production that uses engineered panels. The 600FT roll length supports runs of multiple parts without frequent changeover, which helps maintain consistent edges across a full project.
The 15/16 x 1mm sizing in the SAP description points this PVC banding at panel work where an edge slightly wider than the board is preferred, which allows standard trimming after application in typical cabinet workflows. As an Edge Banding product in the Miscellaneous|Edgebanding category, it is meant to be applied along raw panel edges rather than across broad surfaces, so it fits established edgebander and hand-application processes in woodworking shops. The 1mm thickness works within common machining and trimming setups for PVC, keeping the edge profile compatible with standard cutters used on cabinet doors, shelves, and case parts. The defined dimensions help drafters and production leads specify this Rehau banding consistently on drawings, cut lists, and machine programs.
The Rehau PVC edgebanding with manufacturer part number 302474-032 is positioned for woodworking environments served by Wurth Baer Supply, where cabinets, fixtures, and furniture components are built from sheet goods. Its classification as Edge Banding in the Edgebanding category directs it to exposed edges on doors, drawer fronts, partitions, and shelves that need a defined PVC edge treatment. The 15/16 inch width allows fabricators to run it on panel edges that match typical cabinet dimensions, leaving workable overhang for subsequent trimming. The 1mm thickness gives a measurable edge build that suits door and case parts where a noticeable but controlled PVC edge is desired. With a 600FT length described in SAP data, a single roll can support continuous runs on multiple cabinets or a series of commercial fixtures without constant roll changes during production.
The SAP description string C100019 EMB LAC ties this PVC edgebanding to a specific embossed lacquer style, which helps shops lock in a consistent edge appearance across projects specifying that finish reference. Using the same Rehau PVC edgebanding part for repeats lets production maintain the same visual edge result when a job is re-ordered or expanded later. The 302474-032 manufacturer part number acts as a precise identifier between purchasing, engineering, and the shop floor, reducing mix-ups between different widths, thicknesses, or surface styles inside a broad edgebanding program. The 600FT roll length supports longer, uninterrupted runs on edgebanding machines, which can reduce stop marks and setup interruptions along door and panel edges. Within a workflow centered on engineered panels, the 1mm PVC profile and 15/16 inch width help keep trimming, profiling, and sanding steps predictable from one batch of parts to the next.
Rehau 302474-032 is PVC edgebanding classified under Edge Banding, so it is intended for covering exposed edges on cabinet and furniture panels in woodworking projects.
The SAP description specifies 600FT, giving shops a long, continuous roll suited to running multiple doors, shelves, or cabinet parts without frequent material changeovers.
The SAP description 15/16X1MM identifies a width of 15/16 inch and a thickness of 1mm, which fits common cabinet panel edges and standard trimming setups.
The C100019 EMB LAC notation marks a specific embossed lacquer style, helping designers and shops call out this particular appearance for consistent edge details.
This Rehau PVC edgebanding is offered by Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry and cabinetmakers.
This PVC edge banding is intended for exposed panel edges on cabinets, shelves, and similar casework where a defined 1mm PVC edge profile is specified.
Rehau PVC edgebanding in the 302474-032 configuration gives shops a clearly identified 15/16 x 1mm PVC edge material, described as C100019 EMB LAC 600FT, for consistent cabinet and panel edge work. The Edge Banding classification and detailed SAP description help purchasing, engineering, and production align on a single PVC edge solution for projects calling for this specific embossed lacquer reference. For woodworking operations working with engineered panels, this Rehau edge banding from Wurth Baer Supply connects material specification to repeatable, defined PVC edges across doors, drawer fronts, and case components.
Sold In: 1 Roll