Rehau PVC edgebanding 302474-056 is a PVC edge banding solution from Rehau, Inc. that covers and protects raw panel edges on woodworking projects. The SAP description "15/16X1MM C600404 EMB LAC 600FT" identifies the edgebanding as approximately 15/16 inch wide and 1mm thick, which suits common panel thicknesses where a near-full-height edge is required. The PVC construction provides a consistent, machinable edge surface, which supports routine trimming and flushing in cabinet and furniture work. The 600FT length noted in the SAP description indicates an extended run of material, which allows longer jobs or multiple projects to be handled from a single roll. As an edge banding product in the edgebanding category, it plays the role of finishing the exposed sides of boards so the project has a uniform, professional-looking perimeter ready for regular shop handling.
The SAP description "15/16X1MM C600404 EMB LAC 600FT" defines the working format of this Rehau PVC edgebanding, 302474-056, for planning installation steps. The approximate 15/16 inch width gives coverage over standard sheet-good edges with enough overhang for trimming, which helps create a flush edge after machining. The 1mm thickness offers a balance between a substantial feel at the edge and efficient trimming passes, which is important when using common edgebanders or hand-trim tools. The 600FT length means the material is supplied in an extended run, which simplifies setup by allowing longer feeds on edge banding machines and reduces changeover between projects of similar specification. As a PVC edge banding format from Rehau, Inc., it is designed to act as the applied edge material in typical woodworking edge banding workflows.
This product is identified as Rehau PVC Edgebanding, 302474-056, in the Edgebanding category, making it suitable for applications that require finishing raw edges on wood-based panels. The width and thickness noted in "15/16X1MM" align with many cabinet and furniture carcass components, so it can be applied along sides, tops, bottoms, and shelving where panel cores would otherwise remain exposed. As an edge banding product class, it functions wherever a panel edge needs a defined, durable-looking perimeter, such as cabinet boxes, closet components, and similar woodworking assemblies. The presence of a specific design reference "C600404 EMB LAC" supports projects that depend on a coordinated appearance, where the edgebanding tone and texture are selected to work with a corresponding surface material from the same visual family. The long 600FT run allows these uses to extend across multiple cabinets or room sections without frequent coil changes, which suits both shop runs and repetitive installation programs.
The SAP description "15/16X1MM C600404 EMB LAC 600FT" gives precise dimensional guidance that translates directly into repeatable edging results. An approximate 15/16 inch width provides sufficient overhang beyond most standard panel thicknesses, which helps edge banding equipment or hand tools trim back to a clean, flush surface without exposing the substrate. The 1mm thickness contributes a solid edge profile that still moves smoothly through typical woodworking edgebanders, which supports consistent glue lines and predictable trimming behavior during production. Because the product length is designated as 600FT, shops can sequence multiple parts with the same setup, which promotes uniform edges across an entire project run. As a PVC edge banding product, this format works as the applied edge layer that completes the panel, so matching the 302474-056 part number keeps future replacements or added pieces visually and dimensionally aligned with the original work.
Rehau PVC Edgebanding, 302474-056, is described as "15/16X1MM," indicating an approximate 15/16 inch width and 1mm thickness, which guides equipment setup and trimming expectations.
The SAP description lists "600FT," indicating a 600-foot length that supports longer production runs and multiple projects from the same coil.
The 302474-056 part is categorized as Edge Banding within the Edgebanding category, so it serves specifically as a panel edge finishing material.
This edgebanding is produced by Rehau, Inc., giving shops a consistent brand reference when matching existing installations or specifying future projects.
The code "C600404 EMB LAC" in the SAP description identifies a specific finish or design reference, helping align this edgebanding visually with coordinated panel materials.
The 1mm thickness noted in "15/16X1MM" provides a substantial yet manageable edge, supporting predictable trimming, scraping, and finishing passes on typical woodworking equipment.
Rehau PVC Edgebanding, 302474-056, combines an approximate 15/16 inch width, 1mm thickness, and a 600FT length, all documented in the SAP description "15/16X1MM C600404 EMB LAC 600FT." These details define how it fits into cabinet and furniture workflows that rely on consistent edging dimensions. The specific design reference "C600404 EMB LAC" further identifies its visual family, supporting projects that need coordinated surfaces and edges. For woodworking operations planning repeatable edge banding processes, this part number provides a clearly defined option within Wurth Baer Supply offerings.
Sold In: 1 Roll