Rehau PVC edgebanding 302474-059 is a PVC edge banding that covers and protects raw panel edges, so cabinet and furniture projects present a finished look instead of exposed core. The SAP description lists 15/16 x 1mm dimensions, which means the banding is sized to cover common panel thicknesses while giving a small overhang for trimming, helping installers flush edges without starving the face. The description also identifies the material as PVC, so the banding is suited to typical cabinet and woodworking environments where panels need a durable edge surface. The product is classified as edge banding under the edgebanding category, indicating its role in closing off and finishing edges on boards and doors in production or on-site work.
The SAP description of 15/16 x 1mm defines the working dimensions of this Rehau PVC edgebanding, so installers can match it to their panel thickness and edge-finishing setup. With a width slightly over common panel sizes, the material can be applied and then trimmed to the face, supporting straight, flush edges on cabinet sides, shelves, and doors. The defined thickness also helps set expectations for the edge profile, allowing users to coordinate trimming and scraping tools around this specific banding size in regular production.
This Rehau, Inc. product is identified as PVC edgebanding and classified as edge banding, so it is suited for covering exposed edges on cabinet and furniture components made from panel materials. The 15/16-inch width described in the SAP text works well wherever panels near that thickness need their edges closed off, such as kitchen cabinet sides, shelving, or casework. Because it is listed within the edgebanding category, shops can assign it to edge-finishing stations in their process, bringing the same material to repeated panel runs for consistent results across a job. The defined part number, 302474-059, helps users match the same visual and dimensional characteristics whenever they reorder for follow-up projects or replacements.
The specified 1mm thickness gives this PVC edgebanding a predictable profile, so trimming and scraping tools can be set around a known edge size, helping reduce variation from part to part. The 15/16-inch width allows a modest overhang beyond the panel face, giving installers material to work with when bringing edges flush, which supports straighter lines and fewer visible irregularities at doors and drawer fronts. The manufacturer code C600243 EMB LAC ties this banding to a defined configuration, so production teams can rely on the same combination of width, thickness, and appearance when matching existing runs or expanding an installation. As a Rehau, Inc. edgebanding product, it fits into workflows that depend on PVC banding to finish panels and bring a uniform look across cabinetry and woodworking projects.
Rehau 302474-059 is a PVC edgebanding classified as edge banding, so it is used to cover and finish exposed edges on cabinet and furniture panels.
This PVC edgebanding has a listed size of 15/16 x 1mm, providing slight overhang for trimming while creating a defined edge profile on panel components.
The 1mm thickness gives a consistent edge profile, helping trimming and scraping setups remove excess cleanly and leave a uniform edge on cabinetry parts.
This Rehau PVC edgebanding is typically used on cabinet and furniture edges, closing off raw panel cores on sides, shelves, doors, and similar components.
The 15/16-inch width slightly exceeds common panel thicknesses, giving installers enough material to trim back and achieve clean, flush edges.
The manufacturer part number 302474-059 identifies this specific Rehau PVC edgebanding configuration, helping shops reorder the same size and appearance for repeat work.
This Rehau PVC edgebanding 302474-059 combines a 15/16-inch width with 1mm thickness to deliver a defined edge profile on cabinets and furniture. Using this specific edge banding lets shops repeat the same panel finish whenever they need matching edges.
Sold In: 1 Roll