Rehau PVC edgebanding 302474-063 15/16 in x 1mm

Rehau PVC Edgebanding For Clean Finished Edges

Rehau PVC edgebanding identified as 302474-063 provides a PVC edge solution for covering exposed board edges, so cabinet and furniture components present a uniform finished look instead of raw core. The 15/16 inch width matches common panel thicknesses, helping you cover edge and slight overhang in one pass. The 1mm thickness gives a solid edge profile that stands up to everyday use around cabinet fronts and shelves. The SAP description C200837 EMB LAC describes an embossed, lacquered surface, so the banding brings both texture and sheen to the finished edge in one operation. Supplied as 600 feet per roll in this configuration, it supports longer runs of casework or multiple jobs from a single stock number, which simplifies job planning and material handling. As a Rehau, Inc. product, it aligns with established PVC edgebanding lines used throughout the woodworking industry.

Key Rehau PVC Edgebanding Details On The Job

• The 15/16 inch width covers standard panel edges with enough margin for trimming, so installers can flush-route or scrape to a clean line without exposing the substrate.
• The 1mm thickness builds a substantial edge, so front-facing parts gain a more solid feel and defined profile compared to thinner tape-style options.
• The PVC material construction provides a consistent machining response, so trimming, scraping, and profiling steps stay predictable across the full 600 foot length.
• The C200837 embossed lacquer surface adds texture with a lacquered finish in a single product, so there is no separate edge finishing step for sheen and pattern.
• The 600 foot roll length supports extended production runs, so shops can edge multiple cabinets or larger projects while tracking a single part number, 302474-063.

Edgebanding Size And Material For Streamlined Installation

This Rehau PVC edgebanding in 15/16 inch by 1mm format gives installers a size that works well with typical cabinet panels, so setup for edgebanders, trimmers, or handheld application follows familiar dimensions. The 1mm PVC profile offers enough material for clean trimming passes without chatter, which supports a smoother workflow at the router table or on automatic equipment. Because the SAP description specifies embossed lacquer, the surface character is built in, so once bonded and trimmed, edge preparation focuses mainly on minor touch-up instead of additional finishing steps. The 600 foot length provides continuity across a series of parts, which helps maintain a consistent edge appearance on related components within the same project.

Using Rehau 302474-063 Edgebanding In Woodworking Runs

Where This PVC Edgebanding Fits Best

The Rehau PVC edgebanding 302474-063, classified under the Edge Banding product class and Edgebanding category, aligns with cabinet and furniture panel construction where exposed board edges need coverage. Its 15/16 inch width and 1mm thickness suit casework components, shelves, and vertical partitions built from standard sheet goods, so shop layouts for these parts can rely on a single edging size. The PVC composition is well suited to woodworking environments that use automatic edgebanders or manual edge application on composite or engineered cores, because those processes commonly work with PVC banding. The 600 foot roll length works particularly well in production or multi-piece jobs, where running the same finish and dimension across many parts supports a uniform visual result.

Why These Rehau Details Support Repeatable Results

The 15/16 inch by 1mm dimension on this Rehau PVC edgebanding gives a consistent starting point for machine and hand trimming, which reduces setup variation between jobs using the same material. The C200837 EMB LAC description indicates an embossed lacquered surface, so both texture and finish level are controlled at manufacture, supporting repeatable appearance from roll to roll. The defined part number 302474-063 allows shops to specify and reorder the same edgeband, which maintains color, texture, and thickness continuity on replacement doors or additional cabinets that match earlier work. Being identified as a PVC Edge Banding under the Rehau, Inc. brand connects it with a recognized line in the woodworking industry, so process parameters developed around similar Rehau PVC edgebands can often be applied directly to this item. The 600 foot configuration provides a long continuous supply, which helps reduce mid-run material changes that might otherwise introduce minor visual shifts between components.

Common Questions About Rehau PVC Edgebanding 302474-063

Select Rehau PVC Edgebanding For Consistent Panel Edges

Rehau PVC edgebanding 302474-063 brings together a 15/16 inch by 1mm size, PVC construction, and a C200837 embossed lacquer surface, so cabinet and furniture projects gain a consistent finished edge profile. Using this 600 foot Rehau, Inc. roll as a standard shop edgeband supports uniform appearance and sizing across current jobs and later repeat work that call for the same SAP description and part number.