Rehau PVC edgebanding gives you a PVC edge banding solution designed to cover raw board edges on cabinetry and casework so exposed substrate is hidden and panels present a finished edge along visible runs. The 15/16 inch nominal width works with standard 3/4 inch panel constructions, giving a slight overhang that can be trimmed flush for a tight, professional line on doors, drawer fronts, and carcass edges. The 1mm thickness provides a more substantial edge profile than thin tape-style material, supporting a solid feel at touch points and helping edges hold up in everyday use. The designation C100103 in the description identifies a specific finish reference, so multiple jobs can be matched visually when the same code is specified. The embossed lacquer description signals a textured, lacquered surface on the PVC, so the banding presents more visual depth than a flat film when installed on cabinet or furniture components.
The 15/16 inch width on this Rehau PVC edgebanding leaves workable overhang on standard 3/4 inch panels, so automatic or hand-fed trimmers can remove excess and leave a straight, flush edge. The 1mm thickness gives edgebanders a consistent, measurable profile to work with at the glue line and trimming stations, which supports smooth feed and reduces chatter at the cutter. The embossed lacquer surface interacts with cutting and scraping differently than plain film, so careful setup can yield a clean, textured finish that still reads uniform along the cabinet run. With the C100103 finish designation and part number 302474-070 printed in the documentation, shops can tie machine programs and material racks to one clearly defined edgebanding for repeatable setups.
This Rehau PVC edgebanding, identified as edge banding in the product class, is intended for edging cabinetry and related panel-based components where raw substrate edges need to be covered. The 15/16 inch by 1mm format suits typical furniture board and cabinet carcass construction, so it matches the edge geometry found on many case sides, shelves, doors, and drawer fronts. Because the surface is described as embossed lacquer, this banding pairs well with panel faces that call for a lacquered, textured trim detail, helping the edge visually tie into the specified finish scheme. The C100103 designation gives designers and production staff a way to call out this exact look on drawings, so shop teams can match edges to the planned finish when assembling cabinet runs or furniture groupings.
The defined 15/16 inch width matters during layout because it dictates how much edge overhang you will manage at the bander or during hand application, directly affecting trimming passes and cleanup time. The 1mm PVC thickness influences how cutters engage the material, so once tooling is dialed in for this edge banding, shops can expect predictable trimming results from run to run. The embossed lacquer surface carries texture across the edge, which changes how light reads along doors and panels and can help break up flat reflections in finished installations. The finish reference C100103 and the Rehau manufacturer part number 302474-070 give purchasing and production a shared identifier, so reorders bring in the same visual and dimensional characteristics and help avoid mismatched edging on future repair or add-on work. Together, these defined details support more controlled edgebanding setups and reduce variation on completed casework.
Rehau 302474-070 is a PVC edgebanding classified as edge banding, so it is used to cover raw panel edges on cabinetry and similar casework components.
This PVC edgebanding is described as 15/16 inch by 1mm, so it suits standard 3/4 inch panels while providing enough overhang to trim back to a flush edge.
The C100103 designation in the description identifies a specific finish reference, so projects using this code can maintain consistent edge appearance across multiple components.
The embossed lacquer description indicates a textured, lacquered surface on the PVC, so installed edges show more visual depth than a flat, untextured band.
The 1mm thickness provides a more substantial edge profile than very thin tape, so cabinet doors and fronts feel more solid at touch points along their edges.
The manufacturer part number 302474-070 uniquely defines this Rehau PVC edgebanding, so purchasing and production can request the same material on every reorder.
This Rehau PVC edgebanding, listed as 15/16 inch by 1mm with an embossed lacquer C100103 finish, offers a clearly specified edge solution for cabinetry and casework. The defined dimensions and the 302474-070 part number give designers, estimators, and shop staff a shared reference when planning panel runs, assigning edgebanding programs, and matching future work to existing installations. Use this product when a PVC edge banding is required to cover standard panel edges while delivering a textured, lacquered appearance tied to the C100103 finish code and Rehau branding.
Sold In: 1 Roll