Rehau PVC edgebanding 302474-071 15/16 x 1mm

Rehau PVC Edgebanding For Clean Panel Edges

Rehau PVC edgebanding is PVC edge banding from Rehau, Inc. that finishes exposed panel edges, so cabinet and furniture projects present a consistent, usable surface around the perimeter. The product name Rehau PVC Edgebanding, 302474-071 identifies this specific edging, which aids repeat ordering when matching existing work or standardizing material lists. The product is classified by Wurth Baer Supply as Edge Banding, tying it directly to tasks where raw panel cores need a protective edge treatment. The SAP description "15/16X1MM C500221 EMB LAC 600" signals a 15/16 inch width and 1mm thickness, so the strip covers typical 3/4 inch panels with slight overhang for trimming, which supports clean flush-routing and reduces exposed substrate. The PVC material designation in the product name highlights a plastic edging that works well in everyday woodworking environments where panels require a durable-feeling edge profile along workpiece sides.

Key Edgebanding Details That Support Your Work

• The 15/16 inch width, as reflected in "15/16X1MM" from the SAP description, covers standard panel thickness with margin, allowing trimming rather than precise flush placement, which speeds application on cabinets and casework.
• The 1mm thickness referenced in "15/16X1MM" provides a substantial edging layer, giving the panel edge a defined profile that stands up better to routine contact along doors, drawer fronts, and shelving edges in daily use.
• The Rehau, Inc. branding in the product data clearly identifies the manufacturer, which simplifies aligning this PVC edge banding with other Rehau materials on a job and helps maintain visual continuity across multiple installations.
• The product class "Edge Banding" and category "Miscellaneous|Edgebanding" in the data firmly place this item in edge treatment work, helping installers and shops route it directly into edgebanding stations or workflow steps that handle edge finishing.
• The identifier C500221 within the SAP description connects this 302474-071 variant to an internal color or finish family, supporting accurate re-orders when a project or customer specification calls for this same appearance on later phases.

Edgebanding Dimensions And Part Numbers For Fit

The "15/16X1MM" portion of the SAP description defines the working size, so setups on edgebanders, trimmers, or handheld edge tools can be planned around a known strip width and thickness. That dimensional clarity helps reduce rework because operators align guides, cutters, and feed pressures to a specific edging profile instead of guessing. The manufacturer part number 302474-071 gives a precise reference when job documents, cut lists, or purchase orders call out this edging, which supports consistent fit and appearance across multiple runs. With the product categorized by Wurth Baer Supply as Edge Banding under Edgebanding, shops can route it directly into edge-finishing stages, keeping installation sequences straightforward in cabinet and furniture production.

How This Rehau Edge Banding Fits Real Projects

Where Rehau PVC Edgebanding 302474-071 Is Used

The product name Rehau PVC Edgebanding, 302474-071 and its Edge Banding class point directly to use on furniture and cabinet edges where panel cores are otherwise exposed. On casework or built-ins, the 15/16 inch width from the "15/16X1MM" description spans the edge of typical 3/4 inch boards with a small excess, supporting trimming passes that yield tight, straight edges along doors and side panels. In shop environments tackling repeat runs, the consistent 1mm thickness supports uniform edge appearance from piece to piece, which matters when several components meet at corners or align across long cabinet runs. The PVC designation in the product name marks it as a plastic edging suited to the everyday conditions found around work surfaces, shelving, and vertical panel edges in interior woodworking projects.

Details That Support Repeatable Edge-Banding Results

The SAP description "15/16X1MM C500221 EMB LAC 600" groups several details that support repeatable results, starting with the defined width and thickness used for machine settings and trim allowances. That consistent profile helps edgebanders and trimmers leave a predictable reveal, so operators can maintain the same adjustments across multiple batches. The C500221 element ties this edging into a specific internal reference, which aids accurate reordering and keeps color and finish consistent when jobs stretch across phases or require later service work. The manufacturer part number 302474-071 reinforces that precision, giving designers, purchasers, and installers a shared identifier to specify the same edge material each time a panel edge needs that look and feel. With Rehau, Inc. named as the brand, teams aligning other Rehau components in a project can match materials more easily, supporting a unified appearance along visible edges.

Common Questions About Rehau PVC Edge Banding 302474-071

Select Rehau PVC Edgebanding 302474-071 For Consistent Edges

Choosing Rehau PVC edgebanding, 302474-071 with its 15/16 x 1mm profile brings a defined size and material into your edge-finishing steps, which supports predictable trimming and a uniform feel across cabinet, furniture, and casework runs handled through Wurth Baer Supply.