Rehau PVC edgebanding 302596-009 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present a defined, uniform surface on cabinets and casework. The product is identified as edge banding in the Edgebanding category and Edge Banding product class, so it is designed specifically to cover raw substrate edges in woodworking and cabinet construction. The SAP description 15/16X3MM FLX CP20317 EMB LAC 300FT shows this is a 15/16 inch wide, 3mm thick flexible band, giving enough width to cover common panel thicknesses while the thickness provides a substantial edge profile. The flexible designation in the description indicates the material is suited to run along straight runs and gentle curves without fighting the installer during application. The CP20317 EMB LAC notation identifies an embossed, lacquered surface, which gives the edge a textured, finished appearance that coordinates with matching surfaces for consistent visual results.
The SAP description 15/16X3MM FLX CP20317 EMB LAC 300FT defines the working dimensions and finish that guide fit and setup. The 15/16 inch width gives installers enough overhang on standard board thicknesses, so trimming flush leaves a clean intersection at the face. The 3mm thickness provides a measurable edge that responds predictably to trimming and scraping, helping maintain uniform reveals along cabinet runs. The flexible PVC construction referenced in the description supports feeding through common edge banding equipment without excessive stiffness, which contributes to consistent adhesion along the length. The CP20317 EMB LAC surface code indicates an embossed, lacquered finish, giving the edge a finished appearance that ties the banding visually into the overall panel design.
The product name Rehau PVC Edgebanding, 302596-009 and its placement in the Edgebanding category show that this banding is intended for woodworking and cabinet-related applications where exposed panel edges need to be finished. The 15/16 inch width from the SAP description suits edges on casework, cabinet doors, and shelving built from common sheet goods, giving coverage that can be trimmed back without leaving the substrate visible. The 3mm thickness supports use on higher-traffic edges where a more substantial edge is desirable, such as cabinet doors and frequently handled panels. The flexible PVC designation in the SAP description means it is suited for straight edges and gentle curves typically found in residential or commercial cabinetry layouts. The CP20317 EMB LAC surface identification points to an embossed, lacquered appearance, aligning this product with laminated or coordinated surfaces in woodworking projects.
The 15/16X3MM specification in the SAP description directly affects setup and finished quality. The 15/16 inch width provides working overhang, which supports accurate trimming and scraping operations that leave a straight, even transition to the panel face. The 3mm thickness creates a defined edge that can be profiled or slightly eased after trimming, which helps maintain a consistent look across banks of doors or cabinet fronts. The flexible characteristic identified as FLX in the SAP description influences handling, as it allows the roll to feed smoothly through edgebanding machinery and track well along the substrate, supporting continuous adhesion and alignment. The CP20317 EMB LAC designation denotes an embossed, lacquered surface, which presents a ready-to-use finished face, reducing the need for additional edge finishing steps and helping the edge visually match associated decorative components. The 300FT length referenced in the description supports extended runs on production jobs, limiting interruptions and joints along visible edges.
Rehau PVC edgebanding 302596-009 has a width of 15/16 inch as stated in the SAP description 15/16X3MM, which provides edge coverage with trim allowance on typical panel thicknesses.
The SAP description lists the edgebanding at 3mm thick, giving a substantial edge profile that supports clean trimming and a solid visual edge on cabinets and casework.
In the SAP description 15/16X3MM FLX CP20317 EMB LAC 300FT, FLX identifies the edgebanding as flexible PVC, which supports smooth feeding and application along typical cabinet edges.
The CP20317 EMB LAC code identifies an embossed, lacquered surface, giving the edgebanding a textured, finished face that visually coordinates with matching decorative panels.
The 300FT reference in the SAP description indicates a total length of 300 feet, supporting long production runs or multiple cabinet projects without frequent changeover.
This product is listed in the Edgebanding category and Edge Banding product class, identifying it as PVC edgebanding intended to finish exposed panel edges in woodworking and cabinet applications.
The product name Rehau PVC Edgebanding, 302596-009 and SAP description 15/16X3MM FLX CP20317 EMB LAC 300FT outline a flexible PVC edge banding with defined width, thickness, finish, and run length. Those specifics support planning for cabinet, casework, and shelving projects where panel edges must match surrounding surfaces. For woodworking runs that call for a 15/16 inch wide, 3mm thick flexible PVC band with an embossed, lacquered face, this Rehau, Inc. edgebanding provides a clearly identified option that aligns dimensions and appearance with documented requirements.
Sold In: 1 Roll