Rehau PVC edgebanding 302596-010 15/16x3mm 300FT

Rehau PVC Edgebanding 302596-010 For Clean Edges

Rehau PVC edgebanding 302596-010 is a PVC edge banding designed to finish exposed panel edges, so cabinet and furniture projects present a clean, professional boundary where cores would otherwise show. The 15/16 inch width stated as 15/16X3MM in the description covers standard panel thicknesses with slight overhang, giving room to trim back to a tight, flush line along the workpiece. Its 3mm thickness provides a substantial edge profile, which helps create a solid, defined transition between surfaces on doors, shelves, and casework. The FLX notation in 15/16X3MM FLX indicates a flexible PVC construction, allowing this banding to follow straight runs and gentle curves without fighting the material. CP40823 EMB LAC identifies an embossed lacquer surface, so the working face has a textured, finished look ready to coordinate with matching surfaces. The 300FT length supports longer production runs or multiple projects from a single roll.

Key Edgebanding Details That Support Your Work

• The 15/16 inch width described as 15/16X3MM gives extra coverage past the panel edge, so you can trim flush and remove minor alignment variation along cabinet and fixture runs.
• The 3mm thickness in 15/16X3MM builds a pronounced edge, which helps create a sturdy perimeter on doors, drawer fronts, and shelves where a more substantial profile is preferred.
• The FLX designation signals a flexible PVC construction, allowing the banding to track along cabinet sides and furniture parts without excessive spring-back during layout.
• The CP40823 EMB LAC description specifies an embossed lacquer surface, so the visible edge presents a textured, finished appearance that coordinates with matching decorative faces.
• The 300FT length defined in the description supports extended edging runs, helping keep color and finish consistent across multiple components in the same project.

Edgebanding Dimensions And Finish For Straightforward Application

The stated size 15/16X3MM on this Rehau PVC edgebanding defines both width and thickness, so installers can match the band to typical panel dimensions while planning trimming allowances. The 15/16 inch width offers enough overhang to route or scrape back to the board, which helps keep seams tight along cabinet sides and shelving. The 3mm thickness shapes a robust edge that stands up as a visible design element, supporting applications where the perimeter is part of the look rather than disappearing into the face. The CP40823 EMB LAC notation points to an embossed lacquer finish, giving the working face a textured, coated surface that is ready to coordinate with compatible decorative materials.

How This Rehau PVC Edgebanding Fits Shop Projects

Where Rehau 302596-010 Edgebanding Is Typically Used

This Rehau, Inc. product is classified as Edge Banding in the edgebanding category, so it is suited to finishing raw edges on cabinet, furniture, and general woodworking components. The 15/16 inch width referenced in the SAP description works well on panels where a standard board thickness needs full coverage with a bit of trim margin, such as case sides, tops, and bottoms. At 3mm thick, the banding creates a stronger visual edge on doors and drawer fronts, giving designers a distinct perimeter line rather than a thin strip. The flexible FLX attribute allows the PVC material to conform to gradual curves on furniture parts and straight cabinet runs alike, which aids layout across varied components within the same build. The CP40823 EMB LAC embossed lacquer surface supports use anywhere a coordinated, textured edge is part of the finished appearance.

Details That Help Maintain Consistent Edgeband Results

The manufacturer part number 302596-010 and the SAP description 15/16X3MM FLX CP40823 EMB LAC 300FT clearly tie width, thickness, flexibility, and finish together, helping shops repeat the same look from job to job. Using a 15/16 inch wide band gives installers predictable excess to trim, which supports consistent flush edges along long cabinet carcasses and shelving runs. The 3mm thickness stays uniform along the roll, so routed or machined profiles feel the same to the touch from one door or drawer front to the next. The CP40823 EMB LAC embossed lacquer finish maintains a steady surface character around each panel, which helps mitered corners and long edges read as one continuous line. With a 300FT roll length, shops can run multiple cabinets or an entire room of casework from a single roll, reducing color and texture variation between pieces on the same project.

Common Questions About Rehau PVC Edgebanding 302596-010

Choose This Edgebanding For Coordinated Panel Edges

Rehau PVC edgebanding 302596-010 combines a 15/16 inch width, 3mm thickness, flexible FLX construction, and CP40823 EMB LAC embossed lacquer finish to support clean, coordinated panel edges. The 300FT length suits shops and serious DIY users planning multiple cabinets or furniture pieces from a single, consistent roll. Selecting this edge banding through Wurth Baer Supply aligns material dimensions and appearance with projects that call for a defined, finished perimeter on visible panel edges.