Rehau PVC edgebanding 302596-042 15/16 x 3mm

Rehau PVC Edgebanding 302596-042 For Clean Edges

Rehau PVC edgebanding 302596-042 is a Rehau, Inc. edge banding solution that covers and protects raw panel edges, so cabinet and furniture projects present a finished, professional appearance. The 15/16 inch width stated in the SAP description gives coverage for standard 3/4 inch panels with margin for trimming, which helps installers achieve a flush edge after routing or scraping. The 3mm thickness detail in the SAP description provides a substantial PVC edge, supporting durable corners and impact resistance in typical woodworking environments. The FLX designation in the SAP description indicates a flexible PVC construction, which allows the strip to follow straight runs and gentle curves during application without fighting the material. The CP40796 reference in the SAP description identifies a specific decor or color match within the Rehau program, which helps shops maintain visual consistency across doors, drawer fronts, and casework when they specify this exact part number.

Key Rehau PVC Edgebanding Details That Matter

• The 15/16 inch width in the SAP description covers common panel thicknesses while leaving trim allowance, which supports clean, chip-free flush trimming after application on cabinetry and casework.
• The 3mm thickness listed in the SAP description gives a solid PVC edge profile, which helps edges handle everyday contact on doors, drawer fronts, and exposed cabinet runs.
• The FLX identifier in the SAP description denotes flexible PVC construction, which lets installers work along straight edges and mild contours without excessive heating or stressing the banding.
• The CP40796 code in the SAP description points to a defined decor reference, which allows consistent color and pattern alignment across multiple parts or replacement work when the same code is used.
• The 300FT length stated in the SAP description provides a continuous run of edgebanding, which supports efficient processing on edgebanders or hand application across multiple cabinets in a single job.

Edgebanding Size And Format For Straightforward Installation

The 15/16 inch width in the SAP description gives installers a practical balance between coverage and waste, because it extends past a 3/4 inch substrate yet does not leave excessive overhang to remove. The 3mm PVC thickness provides a predictable edge height, which aligns well with standard edgebanding machinery settings and manual trimming tools on professional and serious DIY setups. The FLX designation in the SAP description signals a flexible PVC format, so the edgebanding responds smoothly during feeding on machinery or during hand application. The 300FT roll length detailed in the SAP description reduces changeovers on edgebanders, allowing longer uninterrupted runs for kitchens, office furniture, or commercial millwork jobs.

How This Rehau Edge Banding Works In The Shop

Where Rehau PVC Edgebanding 302596-042 Is Used

This product is classified as edge banding in the Miscellaneous|Edgebanding category, so it is suited to covering exposed edges on panels in cabinet, furniture, and general woodworking projects. The SAP description specifies PVC material, which positions this edgebanding for use on engineered wood substrates such as particleboard, MDF, or similar panel products commonly used in shops. The 15/16 inch width works well on standard 3/4 inch panels, so face-frame cabinets, frameless carcasses, and shelving can be processed with the same size roll across multiple components. The 3mm thickness supports an edge style often selected for heavier-use fronts, so this banding can be applied to door and drawer fronts as well as carcass edges where a more substantial edge is desired. The CP40796 decor reference in the SAP description connects this banding to a specific visual program, which helps maintain uniform appearance when panels, doors, and trim pieces all use matching Rehau surfaces identified by the same code.

Details That Support Repeatable Edgebanding Results

The 3mm thick PVC dimension in the SAP description creates a consistent material height at the edge, which allows edgebanders and trimmers to be set once and run multiple parts with reliable results. The 15/16 inch width provides predictable overhang on each side of a 3/4 inch panel, so trimming tools remove a similar amount of material on every pass, supporting even edges and reducing sanding time. The FLX flexible PVC designation means the strip moves smoothly through feed rollers, which helps avoid chatter or buckling that could otherwise mark the edge. The 300FT roll length mentioned in the SAP description supports longer runs without stopping to change material, which keeps setup time low during batch processing. The clearly defined manufacturer part number 302596-042 allows shops to reorder the exact same edgebanding, which protects long-term visual consistency when expanding an installation or replacing damaged components later.

Common Questions About Rehau PVC Edgebanding 302596-042

Select Rehau PVC Edgebanding 302596-042 For Your Panels

Rehau PVC edgebanding 302596-042 combines a 15/16 inch width, 3mm thickness, and flexible PVC construction as detailed in the SAP description, giving shops a defined, repeatable edge solution. The CP40796 decor reference and 300FT roll length support consistent appearance and efficient processing on cabinet and furniture projects when this part number is specified.