Rehau PVC edgebanding 302596-058 provides a PVC edge banding solution sized for common panel work, so cabinet and casework edges finish cleanly and consistently job after job. The 15/16 inch width covers standard panel thicknesses with a small margin, which helps hide minor saw variation along the edge and keeps substrate from telegraphing through. The 3mm thickness gives a substantial edge that stands up well at corners, supporting a solid visual line along doors, drawer fronts, and cabinet ends. This flexible PVC construction allows the strip to follow typical straight runs on cabinetry and fixtures without fighting the material during application. The 300ft length supports longer production runs, so shops can edge multiple components from the same roll and maintain uniform appearance across a project.
This Rehau, Inc. PVC edge banding is specified at 15/16 inch by 3mm, so it fits common cabinet and furniture panel builds where the edge is trimmed flush after application. The extra fraction of an inch beyond nominal panel thickness gives working room for alignment before trimming, which helps keep the finished edge line straight. With 3mm thickness, the edge presents a defined profile that reads as a solid band from the front, which is useful when matching modern cabinet lines or commercial fixtures. The flexible PVC construction supports typical edgebander processing, allowing the strip to sit tight against the substrate along straight runs without gaps.
This Rehau PVC edgebanding sits in the Miscellaneous|Edgebanding category and Product Class Edge Banding, placing it in the core materials group used to finish raw panel edges in woodworking. With a 15/16 inch width, it suits many cabinet sides, bottoms, and shelves built from standard sheet goods where the edge is slightly over-banded, then trimmed. The 3mm thickness supports use on doors and drawer fronts that benefit from a more substantial edge reveal, matching common European-style cabinet builds. The CP60220 emboss and lacquered surface connect visually to structured or finished panel faces, helping the edge line integrate into the overall cabinet design. For woodworking shops supplied by Wurth Baer Supply, this roll fits smoothly into panel-processing workflows alongside hinges, fasteners, and laminate materials.
The defined dimensions in the SAP description - 15/16X3MM FLX CP60220 EMB LAC 300FT - give installers clear expectations for how this banding behaves at the machine. The flexible (FLX) PVC body helps the strip seat tightly against the substrate under standard pressure settings, which supports even adhesive contact along the run. The 3mm profile leaves enough material for consistent front and back trimming without thinning the visible edge too aggressively, protecting the visual line at doors and carcass fronts. CP60220 emboss provides a repeatable texture, so multiple pieces edged from the same roll read uniformly when cabinets are lined up. The lacquered surface keeps the appearance consistent across the full 300ft length, which helps maintain a unified look between cabinets, shelves, and panels built from the same batch.
Rehau PVC edgebanding 302596-058 is specified at 15/16 inch width and 3mm thickness, which supports standard panel edging with enough margin for trimming to a clean, flush finish.
The CP60220 EMB LAC notation indicates an embossed CP60220 texture with a lacquered surface, giving the PVC edge banding a textured, prefinished appearance suitable for finished cabinetry.
The Rehau 302596-058 PVC edgebanding is supplied in a 300ft length, which supports edging multiple cabinets or panel sets from a single continuous roll for consistent appearance.
The 3mm thickness on this PVC edgebanding produces a pronounced edge profile, which helps doors, drawer fronts, and case edges present a solid, durable-looking band.
Rehau 302596-058 is PVC edgebanding, so the flexible plastic construction works well in typical panel-edging workflows on cabinetry and furniture projects.
This 15/16 x 3mm PVC edgebanding is manufactured by Rehau, Inc., and supplied by Wurth Baer Supply for woodworking and cabinet applications.
Rehau PVC edgebanding 302596-058 pairs a 15/16 inch by 3mm profile with a CP60220 embossed, lacquered surface, giving shops a defined, prefinished edge for cabinet and furniture panels. The 300ft length supports production work where consistent appearance and sizing across many parts is important. For woodworking professionals sourcing materials through Wurth Baer Supply, this PVC edge banding fits neatly into modern panel-processing setups that call for a flexible, sized band ready for standard edgebanding equipment.
Sold In: 1 Roll