Rehau PVC edgebanding 302596-085 is a Rehau, Inc. edge banding product designed to finish exposed panel edges on woodworking projects. The 15/16 inch width covers standard panel thickness while giving a little overhang to trim, which helps installers achieve a crisp, flush edge on cabinets and casework. The 3mm thickness provides a substantial band, which supports a solid edge profile when machining or profiling after application. This PVC edgebanding belongs to the Edge Banding product class, so it is intended for covering raw edges of sheet goods in shop or onsite work. The CP20018 designation in the description identifies the specific design or program, which lets shops match this band to coordinated components across projects. The embossed and lacquered description points to a textured, finished surface, which supports a consistent, ready-to-use appearance once the band is applied.
The SAP description 15/16X3MM FLEX CP20018 EMB LAC 300FT defines the core installation parameters of this Rehau PVC edgebanding. The 15/16 inch width gives installers room to position the band accurately across the panel edge and still have trim allowance, which supports a straight final edge after routing or flushing. The 3mm thickness means the band presents a noticeable, solid edge, which works well where a more substantial band is desired on cabinet doors, drawer fronts, or shelves. The flexible PVC format allows the material to be handled from a roll in shop environments, which supports continuous feed into common edgebanders or manual application setups. The 300 foot roll length provides extended running capability on a single color and design, which is useful on medium production runs that repeat the same edge detail.
This Rehau PVC edgebanding, identified as 302596-085, belongs to the Edge Banding product class and the Edgebanding category, which aligns it with cabinet and furniture edge finishing tasks. The 15/16 inch width suits common panel build-ups where the finished thickness is near three-quarters of an inch, giving installers a bit of margin while still keeping waste low on repetitive cuts. The 3mm thickness creates a durable-feeling edge presence that is well suited to cabinet fronts, shelves, and carcass parts where exposed edges are visible in daily use. The CP20018 program reference allows shops that already work with this designation to maintain visual continuity on repeat orders, which supports consistent appearance when panels or doors are replaced later. The embossed and lacquered surface detail keeps the face ready for service right after trimming, which helps streamline shop flow from banding to assembly.
The FLEX notation in the SAP description indicates a flexible PVC format, which lets installers feed the band smoothly along straight edges and gentle curves, supporting steady tension and alignment during application. The 300 foot roll length reduces interruptions from roll changes on small to medium production runs, which supports consistent machine settings and cut quality across the entire job. The 3mm thickness provides a stable amount of material above the substrate, which helps trimming tools register positively and produce a uniform flush edge without chatter. The 15/16 inch width places the band slightly wider than many typical panel cores, which gives a controlled amount of overhang for trimming rather than forcing a perfectly flush initial placement. The embossed and lacquered surface delivers a finished face profile that works directly with matching components identified by CP20018, which helps fabricators keep projects visually aligned over time.
The 15/16 x 3mm size defines the band width and thickness, which sets the trim allowance on standard panels and provides a substantial edge that can be machined after application.
The FLEX designation identifies a flexible PVC format, which allows the edgebanding to follow straight edges and gentle curves smoothly during installation from the 300 foot roll.
The CP20018 reference identifies a specific Rehau program, which helps users coordinate this edgebanding with matching designs and maintain consistent appearance on related components.
The EMB LAC description indicates an embossed and lacquered surface, which provides a textured, finished face ready for service once the edgebanding is trimmed flush.
The 300 foot roll length supports longer uninterrupted runs, which lets shops keep machine setups stable while banding multiple parts in the same color and design.
This Rehau PVC edgeband from the Edge Banding class suits cabinetry and furniture panels where a 3mm, 15/16 inch edge treatment is desired for visible exposed edges.
This Rehau PVC edgebanding 302596-085 pairs a 15/16 inch by 3mm flexible PVC format with an embossed and lacquered CP20018 surface on a 300 foot roll, which supports efficient, visually consistent edge treatment on cabinet and furniture panels.
Sold In: 1 Roll