Rehau PVC edgebanding 302596-089 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and furniture projects present a finished edge instead of exposed core material. The product is part of Wurth Baer Supply's edgebanding category, so it fits directly into woodworking and cabinet production workflows where consistent edge treatment is needed on boards and casework parts. The SAP description specifies 15/16 x 3mm dimensions, giving a strip that covers typical panel thickness with extra height for trimming, which helps installers flush-trim cleanly without leaving the substrate visible. The same description identifies a flexible construction, so the strip can bend around gentle contours or handle minor panel variation, supporting smoother installation on real-world parts. A 300 ft length is specified, which supports longer runs or multiple jobs before reloading, helping streamline shop work.
The SAP description for Rehau 302596-089 calls out 15/16 x 3mm dimensions, giving installers a clear profile to match with their edgebanding setups, trimmers, and cutters so the strip aligns with panel thickness and trimming passes. The flexible construction referenced in the description means the band can conform to straight runs and mild curves, which supports application with common edge banding machinery or manual edge banding processes used in woodworking shops. As an edge banding, the product is intended to be applied along the narrow edges of panels, so it converts exposed core or substrate edges into a usable finished surface ready for trimming and final detailing on cabinets and casework.
Rehau PVC edgebanding 302596-089 is identified as edge banding in the edgebanding category, so it serves directly as the finishing strip on cabinet, furniture, and casework panel edges in woodworking environments. The 15/16 inch height from the SAP description gives adequate overhang above and below typical panel faces, which allows trimming tools to remove excess while still covering the full edge and any slight panel misalignment. With a 3mm thickness, the band forms a noticeable but controlled edge, so finished parts feel robust at the edge instead of thin or fragile during regular handling. The flexible construction noted in the description helps the band sit tight on edges that are not perfectly straight, which is helpful for real shop conditions where minor tolerances are common.
The specified 15/16 x 3mm sizing on Rehau PVC edgebanding 302596-089 gives a predictable profile for machine setup, helping operators dial in feed, trim, and scrape settings once and repeat them across many parts. That consistency supports faster throughput on cabinet runs where the same edge banding is used on doors, drawer fronts, and case edges. The flexible edgebanding structure mentioned in the SAP description works with slight panel variations, which reduces the risk of exposed substrate along the edge and cuts down on rework. The 300 ft length specified allows the same coil to run through a sequence of components without interruption, which keeps machine setups stable over more parts and helps maintain a uniform edge appearance across an entire job or series of jobs.
Rehau PVC edgebanding 302596-089 has a SAP description of 15/16 x 3mm, providing extra height for trimming while matching common panel thicknesses in cabinet and furniture work.
The 3mm thickness stated in the description creates a substantial edge profile that feels solid and machines well during trimming, supporting clean edges on cabinet and furniture projects.
This Rehau PVC edge banding is listed under edgebanding, so it is used on raw edges of cabinet, furniture, and casework panels to cover exposed core material.
The flexible note in the SAP description indicates the band can follow straight or slightly curved edges, which supports application to typical cabinet parts with minor variations.
The 300 ft length specified allows longer production runs or multiple cabinet jobs using the same Rehau edgebanding, reducing changeovers during shop work.
The Rehau 302596-089 part number ties directly to this 15/16 x 3mm flexible PVC edgebanding, helping shops reorder the exact edge profile used on previous projects.
Rehau PVC edgebanding 302596-089 combines a 15/16 x 3mm profile, flexible construction, and 300 ft length, so cabinet and woodworking shops can standardize edge treatment across many panels. Choosing this specific edge banding profile allows operators to set up equipment once around the stated dimensions and run repeatable parts, which supports consistent edges from job to job. For projects built around this size and material, Rehau 302596-089 gives a clearly defined edge banding option that aligns with typical cabinet and furniture panel work.
Sold In: 1 Roll