Rehau PVC edgebanding 302596-099 15/16 x 3mm

Rehau PVC Edgebanding 302596-099 For Clean Edges

Rehau PVC edgebanding 302596-099 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges on woodworking projects, giving raw board edges a defined edge line for a more professional, consistent appearance across cabinets and casework. The product is identified as edge banding in the Edgebanding category, so it is intended to cover substrate edges where a finished edge is needed on panels or shelves. Its SAP description "15/16X3MM FLEX CP41570 EMB LAC 300FT" specifies 15/16 inch width and 3mm thickness, so it matches common panel thicknesses while adding a substantial edge profile for impact-resistant corners. The FLEX reference in the description indicates a flexible PVC construction, which helps the material follow normal cabinet edge runs and gentle transitions without kinking, supporting smoother application along straight cabinet and furniture edges.

Key PVC Edgebanding Details For Daily Work

• The 15/16 inch width in the SAP description lines up well with typical 3/4 inch panels, giving a small overhang on each side that can be trimmed flush for clean, square cabinet edges.
• The 3mm thickness stated in the description creates a solid edge band on doors and panels, providing a pronounced edge profile that stands up to regular use on fronts and exposed case pieces.
• The 300FT length listed in the SAP description means one roll supports longer production runs or multiple projects, helping shops run continuous edges on several cabinets or full installations without frequent changeovers.
• The description identifies the material as PVC, so it bonds to compatible panel cores and works well in typical woodworking environments where engineered panels need a durable edge surface.
• The FLEX wording in the SAP line indicates the band is designed to flex during application, which helps it stay seated against normal panel edges along the full run when applied with appropriate edge-banding equipment.

Edgebanding Dimensions That Support Straight Runs

The SAP description "15/16X3MM FLEX CP41570 EMB LAC 300FT" defines the edgebanding as 15/16 inch wide, 3mm thick, and supplied in a 300 foot length, so installers can set up edge-banding equipment around these fixed dimensions for repeatable cabinet runs. The 15/16 inch width gives a slight overhang on standard panel thicknesses, which supports trimming workflows that aim for a flush, chip-free edge along cabinet sides and door edges. The 3mm thickness offers a heavier edge than thin banding, allowing machines and hand tools to reference a more substantial edge during trimming, which helps maintain consistent reveals from door to door.

Using Rehau PVC Edgebanding In Woodworking Shops

Where This Rehau PVC Edgebanding Fits Best

This Rehau, Inc. product is listed under the Edgebanding category as edge banding, so it is suited to finishing exposed panel edges in woodworking and cabinet-focused environments served by Wurth Baer Supply. The 15/16 inch width aligns with many cabinet and furniture parts cut from sheet goods, letting fabricators run a single edgebanding size across doors, drawer fronts, and cabinet sides where that width is appropriate. Because the SAP description specifies 3mm thickness, this banding creates a substantial edge detail that works well on fronts and visible case edges where a thicker edge treatment is desired. The FLEX CP41570 reference in the description identifies this particular flexible PVC formulation and appearance, giving shops a defined option when matching existing Rehau PVC edgebanding 302596-099 installs or standardizing on one look in a project line.

Why These Rehau Details Help Repeatable Results

The precise sizing called out in "15/16X3MM" lets production teams dial in edge-banding equipment to a known width and thickness, supporting consistent set-ups across shifts and reducing adjustment between different Rehau PVC edgebanding runs. The 3mm thickness provides enough material for trimmers to work against without tearing through the edge, which supports smoother cut quality and more consistent feel when doors and panels are handled. With 300FT specified in the SAP description, operators can plan longer, uninterrupted runs from a single roll, which simplifies job planning for cabinet banks or full-room layouts using the same edge treatment. The defined manufacturer part number 302596-099 ties this PVC edge banding directly to Rehau, Inc. production, which supports repeat ordering of the same material when fabricators want the same dimension and CP41570 EMB LAC appearance on replacements or expansions.

Common Questions About Rehau PVC Edgebanding 302596-099

Select Rehau 302596-099 For Consistent Edge Work

This Rehau PVC edgebanding 302596-099 from Wurth Baer Supply combines a 15/16 inch width, 3mm thickness, and 300FT roll length, so shops can standardize on one edge banding size for many cabinet parts. The FLEX CP41570 EMB LAC designation and manufacturer part number 302596-099 give a clear reference when specifying or reordering the same PVC edge banding for matching projects. Use these fixed dimensions and identifiers to align edge-banding equipment, plan runs, and keep panel edges visually consistent across your woodworking jobs.