Rehau PVC edgebanding is a PVC edge banding product from Rehau, Inc. that covers and protects exposed board edges, giving casework, shelving, and cabinet panels a finished working edge. The manufacturer part 302597-019 identifies this specific version so it can be matched and reordered consistently across projects. The SAP description 1-5/16X3MM FLX CP40905 EMB LAC 300FT shows that the strip is 1-5/16 inch wide, allowing coverage of common panel thicknesses while giving a small trimming margin for clean routing. The 3mm thickness provides a more substantial edge profile than thin tape, which supports impact resistance at high-touch edges. The FLX notation indicates a flexible construction, helping the banding follow slight variations along straight runs during application. The 300FT length in the description supports longer production runs or multiple smaller jobs from a single coil.
The 1-5/16 inch width stated in the description gives installers room to position the Rehau PVC edgebanding on panels while still allowing for trimming to a clean, flush edge. The 3mm thickness supports edge profiling after bonding, so routed corners present a defined front line on cabinet doors and case components. The FLX flexible designation indicates that the PVC construction is designed to follow straight board edges without excessive stiffness, aiding feed through common edgebanders. The 300FT length supports running repeated parts in sequence, helping maintain consistent appearance when edging multiple shelves, partitions, and fronts in the same job.
The Rehau PVC edgebanding product class as Edge Banding defines it as a finishing material for exposed panel edges in woodworking and cabinet construction. The 1-5/16 inch width suits work on boards sized so this banding can be trimmed back to a clean line on both faces, which is useful on case sides, cabinet tops, and shelving. The 3mm thickness aligns with applications where a more substantial edge is preferred, such as cabinet doors or vertical partitions that see regular handling. The flexible FLX description supports use on straight runs common in cabinetry and commercial casework, helping installers maintain tight contact along the full edge length.
The manufacturer part 302597-019 ties every coil of this Rehau PVC edgebanding to the same width, thickness, and construction, which supports repeatable visual results when projects are built or expanded at different times. The 1-5/16X3MM sizing in the SAP description lets shops standardize edgebander settings around this profile, reducing reset time when switching between batches that use the same banding. The FLX flexible PVC structure helps feed alignment on straight panels, supporting steady tracking through application equipment for consistent bonding. The 300FT length aids workflow by allowing long production sequences before changing coils, which helps keep color and edge profile uniform across an entire run of cabinets or fixtures.
Rehau 302597-019 PVC edgebanding is described as 1-5/16X3MM, so it provides 1-5/16 inch width and 3mm thickness, supporting full edge coverage with a substantial finished profile.
The 3mm thickness on this PVC edge banding creates a more pronounced edge profile, which supports a solid-feeling front on doors, drawer fronts, and case edges that are frequently handled.
The FLX notation in the description indicates a flexible PVC construction, which helps the edgebanding track along straight panel edges and follow minor surface variations during application.
The SAP description lists 300FT, so this Rehau PVC edgebanding provides 300 feet of material, supporting extended production runs or multiple cabinet projects from one roll.
The 1-5/16 inch width gives coverage over typical panel thicknesses while leaving trimming allowance, helping achieve clean, flush edges on both faces after routing or trimming.
The manufacturer part 302597-019 uniquely identifies this Rehau PVC edgebanding, helping shops reorder the same width, thickness, and construction for consistent future work.
The Rehau PVC edgebanding with manufacturer part 302597-019 combines 1-5/16 inch width, 3mm thickness, and a flexible FLX PVC construction to support dependable cabinet and casework edging. The 300FT length suits production settings that value consistent results across many parts. For projects built around this specific profile, using the same Rehau 302597-019 part helps maintain a uniform edge appearance when jobs repeat or expand.
Sold In: 1 Roll