Rehau PVC edgebanding 302597-043 1-5/16 x 3mm

Rehau PVC Edgebanding 302597-043 For Clean Edges

Rehau PVC edgebanding 302597-043 is Rehau, Inc. edge banding designed to finish exposed panel edges, so cabinet and furniture projects get a uniform, protected edge instead of a raw board face. The SAP description "1-5/16X3MM FLX CP40859 EMB LAC 300FT" identifies this as a 1-5/16 inch wide, 3mm thick PVC edgebanding, giving you a substantial edge profile that matches common cabinet and casework thicknesses. The PVC construction provides a consistent, machinable edge that works well with standard edgebanding equipment, helping keep cuts, trimming, and flushing predictable from piece to piece. The 1-5/16 inch width covers typical panel overhangs, which reduces rework around slight sizing variation. The 300FT roll length allows longer production runs of the same Rehau, Inc. material, supporting jobs where repeat color and texture from the same batch matter.

Key Rehau PVC Edge Banding Advantages On The Job

• The 1-5/16 inch width from the SAP description covers standard panel thickness and minor overhangs, so edges seat fully without narrow reveal lines that would otherwise need additional sanding or trimming.
• The 3mm thickness noted in "1-5/16X3MM" creates a robust edge profile, giving more material for trimming and finishing passes while maintaining a solid feel along cabinet and furniture fronts.
• The PVC edgebanding construction identified in the product name machines cleanly with typical edgebanding tools, supporting smooth routing and scraping passes that keep workflows efficient on repetitive edge runs.
• The 300FT length called out in the SAP description supports extended runs from a single roll, reducing changeovers on the edgebander and helping maintain color and texture continuity across a complete project.
• The manufacturer part number 302597-043 ties this edgebanding directly to Rehau, Inc., which helps match existing Rehau installations and simplifies reordering for future cabinet or casework work.

Edgebanding Size And Format For Straightforward Setup

The SAP description "1-5/16X3MM FLX CP40859 EMB LAC 300FT" specifies a 1-5/16 inch by 3mm PVC edgebanding in a 300FT roll, so feed setup and guide positioning on an edgebander can be dialed in around those fixed dimensions. The consistent 3mm thickness gives trimmers and flush routers a repeatable reference, which supports tight alignment between the edge and the panel surface. The 1-5/16 inch width provides coverage for typical substrate build-ups, allowing installers to center the band and trim both faces with predictable overhang. The roll format described by 300FT supports continuous feeding, which suits production or multi-cabinet runs where downtime for material changes cuts into installation time.

Using Rehau PVC Edgebanding 302597-043 In Projects

Where This 1-5/16 x 3mm Edgebanding Fits Best

This Rehau PVC Edgebanding, 302597-043, is identified as 1-5/16 inch wide and 3mm thick, aligning it with common cabinet and furniture panel constructions where a thicker, more substantial edge is preferred. In cabinetry or casework, that width spans the panel edge and allows a small trim margin, which supports a clean, flush finish after machining. The edge banding category and PVC description position it for use on panel edges in woodworking applications that call for a uniform, durable edge detail. Because the 300FT length is specified, this roll format is well suited for shop environments handling multiple cabinets, closets, or furniture pieces that all rely on the same Rehau, Inc. edge profile.

Why These Dimensions Support Repeatable Edge Work

The defined 1-5/16X3MM size in the SAP description gives installers and shop operators a known banding profile, so machine fences, pressure rollers, and trim stations can be set once and applied across an entire run. The 3mm thickness provides extra material at the edge, which helps maintain a solid appearance even after trimming and any light sanding, supporting consistent reveals on doors, drawer fronts, and panel edges. The 300FT roll length means the same Rehau PVC edgebanding 302597-043 can run through multiple cabinets or furniture components without switching materials midstream, limiting potential variation in edge appearance between pieces cut from different rolls. As an edge banding product under the Rehau, Inc. brand, this edgebanding occupies a defined role in woodworking workflows: it finishes and protects exposed panel edges while supporting repeatable machining setups in both small shops and larger production lines.

Common Questions About Rehau PVC Edgebanding 302597-043

Select Rehau PVC Edgebanding 302597-043 For Your Next Run

This Rehau PVC edgebanding, 302597-043, combines a defined 1-5/16X3MM profile with a 300FT roll length, giving shops a predictable edge solution for cabinet and furniture panel work. The PVC edgebanding construction and Rehau, Inc. manufacturer part number tie this product to a specific, repeatable edge detail that supports consistent machining setups. For woodworking projects that call for a 3mm thick, 1-5/16 inch edge band in a continuous run format, this Rehau PVC edge banding roll aligns with production-focused workflows and helps maintain a uniform finish across related components.