Rehau PVC edgebanding 302597-047 is a PVC edge banding that finishes and protects exposed panel edges, which helps cabinets and casework present a uniform, professional look. The product name identifies it as Rehau PVC Edgebanding with manufacturer part number 302597-047, so installers can match this exact item when repeating a job or aligning with shop cut lists. The SAP description lists it as 1-5/16X3MM FLX CP40839 EMB LAC 300FT, which indicates a 1-5/16 inch wide, 3mm thick flexible strip, giving you a substantial edge profile suited to heavier-duty or decorative applications. The same description specifies a 300FT length, providing a continuous run that supports longer production work and reduces changeovers during banding operations.
The SAP description lists this Rehau PVC edgebanding as 1-5/16X3MM, which means banders can set their equipment for a known width and thickness, helping maintain feed consistency and trim settings across a job. The 3mm thickness gives trimming tools a defined shoulder to work against, which supports clean flush trimming and reduces rework on edges. The 1-5/16 inch width gives installers room to align the tape on varying panel tolerances, which is useful when dealing with slightly oversize or undersize sheet stock. The 300FT length from the SAP description offers ample material for batching panels together, which helps maintain color and profile continuity across multiple cabinets or case runs.
This product is identified as Rehau PVC Edgebanding, Category Miscellaneous|Edgebanding and Product Class Edge Banding, which positions it for use wherever exposed panel edges need a finished PVC edge in woodworking applications. The 1-5/16 inch width from the SAP description suits edge treatment on panels that require a wider face, such as thicker shelving, tops, or applied panels, which helps keep the substrate fully covered. Its 3mm thickness provides a more substantial edge profile than thin tape, which works well where a pronounced front edge detail is desired on cabinets or casework. The 300FT length described in the SAP data supports production-style environments, which benefits shops that process multiple parts in a single setup.
The SAP description notes 1-5/16X3MM FLX CP40839 EMB LAC 300FT, which gives consistent dimensional and identity data that can be entered into edgebander programs or job tickets for repeat results. The 1-5/16 inch width and 3mm thickness allow standard sizing in cutting lists, which simplifies calculating linear footage and yield across a 300FT coil. The flexible (FLX) designation in the SAP description indicates a bendable PVC format, which helps the material track smoothly through edge banding machinery and around modest curves without fighting the feed path. The explicit manufacturer part number 302597-047 connects directly to Rehau, Inc., which helps shops align purchasing, inventory, and cut planning to the same specification over time.
The Rehau PVC edgebanding is listed as 1-5/16X3MM in the SAP description, so it provides a 1-5/16 inch wide, 3mm thick edge for substantial panel fronts.
The SAP description specifies a 300FT length, which supports long, continuous runs of edging and reduces the number of joints across multiple panels.
The manufacturer part number 302597-047 uniquely identifies this Rehau PVC edgebanding, which helps match exact size and finish when reordering or planning repeat jobs.
The 3mm thickness from the SAP description provides a pronounced edge that gives panels a solid front and offers a clear reference for trimming operations.
The 1-5/16 inch width accommodates deeper edges, allowing full coverage of thicker tops or panels so substrate material stays concealed on the finished piece.
The FLX designation in the SAP description identifies a flexible PVC strip, which helps it feed smoothly through banding equipment and follow modest curves on workpieces.
The SAP description and product name identify this item as a 1-5/16X3MM flexible Rehau PVC edgebanding supplied in a 300FT length, which gives shops a defined size and quantity to plan for. The manufacturer part number 302597-047 ties directly to Rehau, Inc., which supports consistent spec matching across projects. For cabinet and woodworking operations that rely on repeatable sizing and continuous runs, this edge banding provides a clearly documented option ready to align with existing layouts and cut plans.
Sold In: 1 Roll