Rehau PVC edgebanding 302597-050 is Rehau, Inc. edge banding designed to finish exposed panel edges with a consistent PVC surface. The SAP description 1-5/16X3MM FLX CP40527 EMB LAC 300FT defines a 1-5/16 inch wide, 3mm thick flexible strip that covers substrate edges in a single pass, which helps produce a solid, proportionate edge on thicker panels in cabinet and furniture work.
The CP40527 designation identifies a specific Rehau design that keeps appearance predictable from roll to roll, which matters when matching multiple cabinets or panels across a project. The EMB reference indicates an embossed surface, so the face is formed with texture that visually breaks up flat edges and supports a more finished look on visible runs.
The LAC detail indicates a lacquer-related finish description, which means the surface is prepared to present a uniform face in woodworking environments where appearance consistency is critical on doors, drawer fronts, and casework edges.
This Rehau PVC edgebanding uses a 1-5/16 inch width as called out in the SAP description, so it spans common panel thicknesses while leaving enough overhang for trimming tools to cut a clean, straight edge. The 3mm thickness specified in the same description produces a pronounced, solid-feeling edge profile, which supports applications where cabinet fronts, shelves, or worktops benefit from a weightier look at the perimeter.
The flexible FLX characteristic in the description means the strip conforms along the panel edge length without fighting the substrate, which matters when aligning the band with the face during bonding. The 300FT roll length supports working through sequential parts, so installers can maintain the same color and surface profile around an entire run of casework or furniture components.
The product name Rehau PVC Edgebanding, 302597-050 and the Product Class Edge Banding identify this as a PVC strip specifically intended to finish raw edges on panels used in woodworking projects. The 1-5/16X3MM dimensions in the SAP description make it suited to thicker cabinet sides, shelving edges, and other panels where a 3mm build gives the front a more substantial appearance compared to thinner edge treatments.
The CP40527 designation ties this model to a specific Rehau surface design, which keeps the visual result consistent when edging multiple pieces in the same room or installation. Because the EMB notation specifies an embossed surface, this edgebanding fits situations where a textured edge better complements the chosen laminate or surface material, especially on tall cabinet runs or exposed shelving where the edge is at eye level.
The LAC reference in the SAP description points to a lacquer-related finish description, aligning this edgeband with woodworking environments that prioritize a coherent finish story from face to edge. The 300FT roll length supports shop and jobsite workflows where many edges must be processed from a single lot, which helps maintain continuity on kitchens, office casework, or built-ins using the same Rehau pattern.
The 1-5/16 inch width described in 1-5/16X3MM FLX CP40527 EMB LAC 300FT gives enough coverage to center the band over the panel edge with margin on both sides, which assists in achieving a consistent flush-trim line across long runs. The 3mm thickness in the same description builds an edge that is easier to profile and ease, allowing installers to create a comfortable front edge on doors and shelves with standard trimming tools.
The FLX designation for flexible material means the edgebanding follows panel edges without resisting during application, which supports smoother feeding through edge-processing equipment or careful manual application on straight and gently curved sections. The embossed EMB surface helps disguise minor scuffs that occur while handling or trimming, so the finished edge holds its appearance when components are installed and used.
The LAC detail in the SAP description aligns this edgebanding with lacquer-related finish descriptions, giving the surface a defined character that reads consistently from piece to piece, which is useful when building matching banks of cabinets or continuous wall units. The 300FT length supports planning larger jobs from a single roll, reducing changeovers during production and helping maintain the same Rehau surface pattern and designation, CP40527, throughout the project.
Rehau PVC edgebanding 302597-050 designates a Rehau, Inc. PVC edge banding with SAP description 1-5/16X3MM FLX CP40527 EMB LAC 300FT, defining its width, thickness, flexibility, surface designation, and roll length.
Rehau PVC edgebanding, 302597-050, has a SAP description of 1-5/16X3MM, meaning it is 1-5/16 inch wide and 3mm thick, creating a substantial edge for cabinet and panel applications.
Rehau PVC edgebanding, 302597-050, uses FLX in the SAP description to indicate a flexible PVC strip, which allows it to follow panel edges more easily during application and trimming.
Rehau PVC edgebanding 302597-050 carries CP40527 EMB LAC in the SAP description, tying it to a specific Rehau surface design, embossed texture, and lacquer-related finish description for visual consistency.
Rehau PVC edgebanding, 302597-050, is identified as 300FT in the SAP description, providing a 300-foot roll suited for running multiple cabinet or panel edges from a single lot.
Rehau PVC edgebanding 302597-050 is classified as Edge Banding under edgebanding category, supporting woodworking projects that need finished edges on cabinet, furniture, or casework panels.
Rehau PVC edgebanding 302597-050 from Wurth Baer Supply provides a 1-5/16 inch wide, 3mm thick flexible PVC edge banding with CP40527 EMB LAC designation in a 300FT roll, aligning with cabinet and panel work where consistent textured edges and substantial profiles are required.
Sold In: 1 Roll