Rehau PVC edgebanding 302597-061 is a PVC edge banding designed to cover and protect raw panel edges, giving casework and cabinetry a finished, consistent look along the edge line. The 1-5/16 inch width from the 1-5/16X3MM FLX CP41177 EMB LAC 300FT description matches common panel thickness layouts where a small overhang is trimmed back, helping installers dial in a tight, flush edge. The 3mm thickness builds a solid edge profile that feels substantial in hand, which matters on exposed ends and high-touch cabinet fronts. The FLX designation signals a flexible construction, so the strip follows gentle curves and standard straight runs without fighting the substrate, aiding in controlled application. The EMB LAC description indicates an embossed, lacquered surface that visually upgrades basic board edges and gives a more finished appearance along doors, drawer fronts, and case edges.
The 1-5/16 inch dimension on this Rehau PVC edge banding gives working room on standard panel builds, so installers apply, trim, and flush edges while fully covering the substrate. The 3mm thickness pairs well with applications where a more substantial edge is preferred, supporting a pronounced transition between face material and edge line. The EMB LAC characterization indicates an embossed and lacquered surface that visually enhances the edge, helping it sit comfortably alongside finished cabinet doors, drawer fronts, and panels. Together, these details provide a banding option that supports clean trimming, edge protection, and a professional-looking transition from face to edge.
This Rehau PVC edgebanding, identified as 1-5/16X3MM FLX CP41177 EMB LAC 300FT, is set up for panel and cabinet edge applications that benefit from a 3mm build. The 1-5/16 inch width suits cabinet sides, shelves, and similar case parts, giving room to trim back to a clean, straight edge. The flexible PVC noted by FLX supports runs along typical casework edges where smooth application is important, from base cabinets to tall units. The embossed and lacquered surface indicated by EMB LAC provides an upgraded finish on exposed edges, so open ends, door edges, and visible shelving look deliberate rather than raw. The 300FT length supports project runs where repeated color and profile consistency matter across multiple components or several cabinet bodies.
The combination of 1-5/16 inch width and 3mm thickness gives installers predictable trimming behavior, so cuts along the edge can be tuned to flush without exposing the core, supporting repeatable edge quality from piece to piece. The flexible PVC referenced in FLX helps the banding relax against the substrate, which aids in maintaining pressure and contact while working along longer edges. The embossed, lacquered description (EMB LAC) adds visual depth and sheen, allowing the finished edge to align better with surrounding finished surfaces in a run of cabinets. Having this defined size, finish, and construction under a single part number, 302597-061, simplifies reordering the same edge profile and look on follow-up jobs or repairs, supporting consistent results across multiple installations.
Rehau PVC edgebanding, 302597-061, is a PVC edge banding, so it creates a durable plastic edge over raw board, helping protect the substrate while giving a uniform finished appearance.
Rehau PVC edgebanding, 302597-061, is described as 1-5/16X3MM, so the 1-5/16 inch width provides coverage past standard panel edges, allowing trimming back to a clean, flush finished edge.
This Rehau 3mm PVC edge banding builds a thicker edge profile, which gives cabinet and panel edges a more substantial feel and visual presence compared with thinner edge treatments.
The Rehau PVC edgebanding, 302597-061, is described as 300FT, providing an extended continuous run for edging multiple cabinet parts or larger projects without frequent roll changes.
The 1-5/16X3MM FLX CP41177 EMB LAC 300FT description indicates a flexible PVC edgeband with an embossed, lacquered surface, supporting easier handling and a more refined finished edge.
The EMB LAC notation points to an embossed, lacquered finish that enhances the look of raw panel edges, helping them visually align with surrounding finished cabinet surfaces.
Rehau PVC edgebanding 302597-061 combines a 1-5/16 inch width, 3mm thickness, and flexible PVC construction to support clean, repeatable cabinet edge work. The embossed, lacquered surface from the EMB LAC description further refines exposed edges, so finished panels and casework present a consistent, professional appearance from face to edge.
Sold In: 1 Roll