Rehau PVC edgebanding 302597-064 is a PVC edge banding that finishes exposed panel edges so workpieces present a clean, uniform edge line. The SAP description "1-5/16X3MM FLX CP20955 EMB LAC 300FT" states the banding is 1-5/16 inches wide and 3mm thick, giving enough coverage for typical substrate thickness while providing a solid edge profile. The same description notes a 300FT length, so one roll covers longer runs or multiple cabinets before a changeover. The term "FLX" indicates a flexible construction, allowing the strip to follow normal cabinet and furniture contours during application. The reference to Rehau, Inc. ties this product to a dedicated edgebanding manufacturer, which supports consistent sizing across the entire roll. The CP20955 EMB LAC designation provides a defined finish reference, helping shops match this banding to the intended surface program on repeat jobs.
The 1-5/16 inch width of this Rehau PVC edgebanding, taken from the SAP description, provides extra material on both sides of a standard panel, which is important for trimming after application on an edgebander or manual setup. The 3mm thickness gives a robust edge that works well with typical trimming and scraping operations used in woodworking shops. The "FLX" note in the description indicates a flexible PVC structure, which supports smooth feeding through most edge banding machines and better contact along normal panel edges. The 300FT length on the roll suits runs where consistent setup is maintained, allowing installers to keep the same parameters over many parts. The clearly defined manufacturer part number 302597-064 aids in repeating the same setup and tooling parameters whenever this banding is pulled again for production.
The product class Edge Banding and the Rehau PVC edgebanding name show this strip is used on exposed panel edges in woodworking and cabinet projects. The 1-5/16 inch width, noted in the SAP description, fits applications where standard panel thicknesses need full coverage with room for trimming, such as cabinet sides, shelves, and doors. The 3mm thickness supports applications that benefit from a more pronounced edge detail, such as higher-traffic fronts or pieces where a slightly rounded edge is preferred. The 300FT length suits both production shops and serious DIY users handling multiple case pieces from a single roll. The CP20955 EMB LAC code ties the banding to a defined Rehau surface program, which matters when coordinating edges with matching decorative surfaces on cabinets or furniture projects.
The explicit 1-5/16X3MM sizing gives installers a predictable edge banding profile, helping set edgebander trimming, scraping, and flush-routing parameters once and reuse them across entire runs. The 3mm thickness creates a stable cutting and scraping zone, which can reduce fine-tuning between parts during a project. The "FLX" identifier indicates a flexible PVC construction, which supports consistent tracking along panel edges, helping maintain bond line and edge alignment along the full length of doors or long panels. The 300FT roll length helps maintain the same material properties from the first part to the last in a run, which supports visual and dimensional consistency across a kitchen or bank of casework. The Rehau manufacturer part number 302597-064 and the CP20955 EMB LAC program reference streamline reordering and job documentation so shops can return to the same edge profile and finish combination on repeat jobs without requalifying new material.
Rehau PVC edgebanding 302597-064 is listed as 1-5/16X3MM, providing 1-5/16 inch width and 3mm thickness, which supports trimming and creates a substantial finished edge on panels.
Rehau PVC edgebanding 302597-064 is specified at 300FT, allowing extended runs on an edgebander so multiple panels or complete cabinet sets can be processed from one roll.
The FLX term in the SAP description indicates a flexible PVC construction, which helps the banding follow normal panel edges during application and trimming operations.
The 3mm thickness on Rehau PVC edgebanding 302597-064 provides a robust edge profile that accepts typical trimming and scraping, supporting a defined, durable-feeling edge on cabinets and furniture panels.
The CP20955 EMB LAC code identifies a specific Rehau program and finish, helping shops match this edge banding to their selected decorative surface and maintain consistent appearance across projects.
Manufacturer part number 302597-064 provides a precise reference for reordering and job notes, supporting consistent material selection and repeatable setup across different production runs.
Rehau PVC edgebanding 302597-064 combines a 1-5/16 inch width, 3mm thickness, and flexible PVC construction to support clean, trimmable edges on cabinet and furniture panels. The 300FT roll length suits extended runs, while the CP20955 EMB LAC program and clear part number help shops align material choice with surface design and repeat projects confidently. For woodworking operations and serious DIY users needing a consistent edge solution, this Rehau PVC edgebanding offers defined dimensions and finish coding that integrate smoothly into established workflows.
Sold In: 1 Roll