Rehau PVC edgebanding 302597-072 is a PVC edge banding designed to finish exposed panel edges so they look uniform and protected in cabinet and furniture projects. The 1-5/16 inch width lets you cover typical panel thicknesses with room for trimming, giving you a consistent edge line along casework and shelving. The 3mm thickness provides a substantial edge profile that stands up to everyday contact on cabinet fronts and work surfaces. The flexible construction described as FLX allows the banding to follow gentle curves and panel variations, helping you keep tight contact when working on long runs. The CP60447 EMB LAC designation identifies a specific embossed and lacquered finish, so you can match this look consistently across multiple jobs. Supplied in a 300 foot length, the roll format supports continuous runs on edgebanders, reducing changeovers during production.
This Rehau edge banding uses a 1-5/16 inch width that gives you trimming margin on standard panels, so you can run the banding slightly proud and then cut it back for a sharp edge. The 3mm thickness works well with typical edgebanding machines and hand trimmers designed for thicker PVC, helping you maintain control during flush trimming. The flexible FLX description indicates the banding is suited to standard edgebanding workflows where the material must wrap along long edges without fighting the feed. The 300 foot roll format keeps material feeding continuously through edgebanders, which supports steady production without frequent stops to change rolls during installation.
This Rehau PVC edgebanding, part number 302597-072, is classified as edge banding and is suited to finishing exposed edges on cabinets, furniture, and similar panel-based construction. The 1-5/16 inch width works well when edging common sheet goods where a small amount of overhang is desirable for trimming, giving you flexibility on slightly over- or undersized panels. At 3mm thick, the banding helps create a pronounced edge that complements modern cabinet fronts and shelving where a stronger visual line is preferred. The CP60447 EMB LAC finish code defines a specific look, allowing this banding to be used when that finish has been selected elsewhere in the project so edges visually align with the design intent. The 300 foot roll length also suits shop environments that process multiple pieces per job, supporting repeated use across a run of cabinets, shelves, or casework.
The 1-5/16 inch by 3mm format of this Rehau PVC edgebanding helps you balance speed and control: the added width gives trimming room, while the thicker profile provides material support against chipping during machining. The PVC construction supports consistent feeding through edgebanders that are set up for PVC stock, helping you maintain a steady pace without changing settings between pieces. The flexible FLX characteristic aids in keeping the banding tight to the substrate along long edges, which supports strong adhesive bonds when used in typical edgebanding processes. The CP60447 EMB LAC designation lets shops return to the same SKU when repeating a color and texture, reducing the chance of visual mismatch between earlier and later work. With 300 feet per roll, shops can run multiple cabinets or full room sets from a single roll, simplifying inventory handling during a project.
This Rehau PVC edgebanding 302597-072 is described as 1-5/16 inch by 3mm, giving enough width for trimming and a thicker edge profile suitable for modern cabinet and furniture projects.
The 3mm thickness on this edge banding creates a more substantial edge, which supports a pronounced profile and stands up well on doors, drawer fronts, and frequently handled edges.
The CP60447 EMB LAC designation identifies a specific embossed and lacquered finish on this Rehau PVC edgebanding, helping projects maintain a consistent appearance when using this code.
The flexible FLX construction allows the PVC edgebanding to follow long edges and slight variations in panels, supporting continuous contact and smooth runs through edgebanding equipment.
The 300 foot roll length lets shops edge multiple cabinets or casework sections from one roll, reducing roll change interruptions during production runs and simplifying material planning.
This Rehau PVC edgebanding finishes exposed panel edges, providing a unified look and protective edge on cabinets, furniture, and similar assemblies that use sheet goods.
This Rehau PVC edgebanding 302597-072 combines a 1-5/16 inch width, 3mm thickness, and flexible FLX construction to support efficient edging on panel projects. The CP60447 EMB LAC finish code and 300 foot roll length help shops repeat the same look across multiple jobs while maintaining steady production. For cabinet, furniture, or general panel work that specifies this finish and size, this edge banding provides the defined edge profile and format needed for consistent results.
Sold In: 1 Roll