Rehau PVC edgebanding 302597-077 1-5/16 x 3mm

Rehau PVC Edgebanding 302597-077 For Clean Edges

Rehau PVC edgebanding 302597-077 is a flexible PVC edge banding that covers and protects exposed panel edges, giving casework and cabinetry a finished look while masking raw substrate. The 1-5/16 inch width matches common panel thickness plus overhang, which supports trimming flush after application and keeps seams tight. The 3mm thickness builds a solid edge profile, helping panels handle everyday use around edges without exposing the core. The CP41214 designation identifies the specific color and pattern family, so runs using this banding stay visually consistent across projects. The embossed lacquer surface creates a textured, coated finish, which affects how light hits the edge and how it coordinates with matching surfaces. The 300ft roll length supplies continuous material for longer runs, reducing splice points along cabinet sides, shelves, or door edges.

Key Rehau PVC Edge Banding Job Advantages

• The 1-5/16 inch width gives coverage beyond standard panel thickness, which allows trimming back to a clean, straight line along both faces without leaving a lip.
• The 3mm thickness creates a defined edge profile, which supports routing or trimming operations that leave a substantial, chip-resistant edge detail on cabinets and fixtures.
• The flexible PVC construction bends with normal cabinet contours, which helps the band sit tight to the substrate during heating and pressing and reduces gaps.
• The CP41214 color/pattern code ties this banding to a specific Rehau design family, which lets shops keep color and pattern alignment consistent across doors, drawer fronts, and cases using the same code.
• The embossed lacquer finish adds both texture and a coated surface, which affects edge sheen and feel so finished parts visually coordinate with selected panel materials.
• The 300ft roll format supplies extended length for production runs, which minimizes edge joints along long parts and supports repeatable processing on edgebanders.

Edgebanding Size And Finish For Straightforward Runs

This Rehau PVC edgebanding uses a 1-5/16 inch width, giving coverage that extends beyond typical panel thicknesses so trimming knives or routers can cut back to both faces in one pass. The 3mm thickness pairs with that width to form a substantial edge that stays visible after profiling, which is useful where the edge acts as a visual frame. The embossed lacquer surface changes the way the banding feeds and cuts, as the textured, coated finish interacts with pressure and trimmers differently than a smooth raw surface but stays tied to the CP41214 design code for appearance.

Where Rehau 302597-077 Works And Why Details Matter

Using This 1-5/16 x 3mm Embossed PVC Edgeband

This Rehau, Inc. PVC edge banding sits in the edgebanding category for panel work, so it is suited to covering exposed edges on cabinetry, furniture, and other casework where a 3mm profile is desired. The 1-5/16 inch width supports use on panels near that overall thickness, helping the band wrap the edge with enough margin for trimming flush to both faces. Because it is flexible PVC, the strip conforms to straight edges and gentle curves typical of cabinet components, aiding adhesion along the full edge length when processed with standard edgebanding equipment. The CP41214 coded design and embossed lacquer finish give the edge a defined visual and tactile character, which matters on doors or tops where the viewer sees and contacts the edge regularly.

Design Code, Finish, And Roll Length For Consistency

The manufacturer part number 302597-077 ties directly to this exact combination of width, thickness, CP41214 design, and embossed lacquer surface, which lets shops reorder the same edge treatment and maintain project-to-project consistency. The CP41214 code identifies the coordinated appearance within Rehau offerings, so matching edges across doors, drawer fronts, and cabinet carcases stay visually aligned when this banding is used throughout. The embossed lacquer adds a textured, coated layer over the PVC, influencing how trim cuts break the edge and how the finished surface looks next to laminated or coated panels using the same design reference. With a 300ft roll length, small and mid-size runs draw from a single roll, which reduces the number of roll changes during production and helps keep machine setup stable from part to part.

Common Questions About Rehau PVC Edgebanding 302597-077

Select Rehau PVC Edgebanding 302597-077 For Matching Runs

Rehau PVC edgebanding 302597-077 combines a 1-5/16 inch width, 3mm thickness, CP41214 design code, embossed lacquer finish, and 300ft roll length to support consistent, repeatable edge treatment on casework. For projects built around this specific Rehau design reference, using this edgebanding on exposed panel edges keeps visual alignment and edge feel uniform across cabinets, furniture pieces, and other assemblies.