Rehau PVC edgebanding 302597-079 is a PVC edge banding product from Rehau, Inc. that provides a dedicated solution for finishing exposed board edges, so panel projects gain a defined and consistent edge treatment. The product is identified as edge banding in the Edgebanding category, which means it is intended to cover raw substrate edges in woodworking and cabinet-related work where a banded edge is required. The 1-5/16 inch width noted in the description aligns to typical panel thickness coverage, allowing the banding to span the edge with material available for trimming. The 3mm thickness gives the edge a substantial profile, which supports a durable-feeling edge treatment once applied and trimmed. The 300ft length described in the SAP text provides extended run capacity from a single product, which supports longer jobs or repeated use on matching projects without changing to a different edge banding.
The 1-5/16 inch width listed for this Rehau PVC edgebanding gives installers material that extends beyond the edge of the panel during application, which helps trimming tools cleanly flush the band to the surface. The 3mm thickness described in the SAP text provides a defined edge profile, which interacts well with trimming and scraping operations to produce a finished corner transition. The designation of this item as PVC edge banding places it within common edgebanding workflows, so it can be cut from the 300ft length and applied along panel edges as part of a standard fabrication sequence. The flexible characteristic indicated by FLX supports handling during installation because the banding can be guided along the edge while maintaining contact until it is fully bonded and trimmed.
This Rehau PVC edgebanding, identified by manufacturer part number 302597-079, is supplied as edge banding in the Edgebanding product class, so it is intended for use on exposed board edges in woodworking projects. The 1-5/16 inch width specified in the SAP description is well suited to cover the full thickness of many panel constructions, which lets fabricators apply the banding so that both faces can be trimmed back to a clean edge. The 3mm thickness recorded in the description gives the edge a noticeable profile, which can visually complement panels where a thicker edge detail is desired. Because the product is described as FLX PVC edgebanding, the material is suited to follow panel edges in typical shop conditions, supporting continuous application along cabinet sides, shelves, and similar parts.
The combination of 1-5/16 inch width and 3mm thickness in this PVC edge banding supports repeatable trimming results, because the installer can work with a predictable overhang and edge depth every time the material is applied to a panel. The 300ft length described in the SAP text supports consistency across multiple components, since large sets of cabinet or furniture parts can be banded from the same run of material. The CP20895 reference in the SAP description identifies this specific configuration within Rehau offerings, helping shops keep track of which edge banding was used on a job so matching pieces can be produced later. As an edge banding product within the Miscellaneous|Edgebanding category, this item fits into established edge finishing steps where panels are cut, banded, and trimmed before assembly, which contributes to predictable workflow sequencing on repeat projects.
Rehau PVC edgebanding 302597-079 is described as 1-5/16 inch wide and 3mm thick, so it covers typical panel edges while providing a noticeable edge profile for trimming and finishing.
The 300ft length listed in the SAP description offers extended continuous material, supporting longer runs or multiple projects while maintaining the same edge appearance across parts.
The FLX reference in the SAP description identifies this as flexible PVC edgebanding, which allows the strip to follow panel edges during application for more controlled placement.
This Rehau PVC edgebanding is in the Edgebanding product class, so it is intended for finishing exposed edges on panels used in woodworking and cabinet-related projects.
The 3mm thickness noted in the description provides a substantial edge profile, which helps create a defined transition from the panel face to the edge banded surface.
The CP20895 designation in the SAP description uniquely identifies this Rehau PVC edge banding configuration, helping shops reorder the same material for matching future work.
This Rehau PVC edgebanding 302597-079 from Rehau, Inc. combines a 1-5/16 inch width, 3mm thickness, and 300ft length to support repeated edge finishing on panel-based projects. Adding this specific edge banding to your materials lineup lets you handle exposed edges with a consistent PVC solution that matches across components.
Sold In: 1 Roll