Rehau PVC edgebanding 302597-080 is a PVC edge banding from Rehau, Inc. designed to finish exposed edges on wood-based components in woodworking projects. The SAP description "1-5/16X3MM FLEX CP20956 EMB LAC 300FT" shows that this edgebanding is 1-5/16 inches wide and 3mm thick, so it covers typical panel edges in that size range with a substantial face. The description also states it is flexible, which allows the banding to follow gentle curves and handle normal cabinet layouts without fighting the material. The 300FT reference identifies a 300-foot length, giving installers and shops enough continuous material for multiple parts or larger runs before changing rolls.
This Rehau PVC edgebanding is described as 1-5/16 inches wide, so during installation there is enough material to overhang typical substrate edges slightly and then trim flush. The 3mm thickness creates a solid edge that stands up to normal trimming operations used in woodworking shops. The reference to FLEX in the SAP description indicates that the strip can bend along normal cabinet edges without resisting the substrate, which supports smoother feeding through standard edgebanders or careful hand application.
The category listing as Edgebanding and Product Class Edge Banding show that Rehau PVC Edgebanding, 302597-080 is intended for finishing exposed edges of panels in cabinet, furniture, or general woodworking applications. The 1-5/16 inch width works on panels where that face width comfortably covers the core and any surface material at the edge. The 3mm thickness means this banding suits situations where a more substantial edge is desired, such as cabinet doors, drawer fronts, or shelves that benefit from a thicker PVC edge. The 300-foot length noted in the SAP description serves shops that run multiple pieces from the same roll, helping keep color and texture consistent from part to part on a project.
The combination of 1-5/16 inch width and 3mm thickness in the SAP description gives installers an edge material that can be applied with some overhang and then trimmed, allowing a clean line along the face of the workpiece. The thicker 3mm edge provides more material at corners and along high-contact edges, which is useful when parts will be handled or bumped during everyday cabinet or furniture use. The FLEX designation means the PVC strip can follow typical straight edges and mild contours without fighting against the machine or hand tools, supporting steady feed and reducing the tendency for the material to spring away from the substrate during bonding. Because the roll length is stated as 300FT, shops can run series work, such as matching cabinet fronts or shelves, from one continuous roll, supporting consistent edge appearance across the run.
Rehau PVC Edgebanding, 302597-080 is a PVC edge banding from Rehau, Inc. used to finish exposed edges on panels in woodworking and cabinet projects.
The SAP description lists the edgebanding as 1-5/16 inches wide and 3mm thick, which sets the coverage and edge profile available during installation.
The SAP description specifies 300FT, providing a 300-foot roll that supports multiple parts or larger runs from one continuous length of material.
The term FLEX in the SAP description indicates the banding is flexible, helping it conform to normal panel edges and gentle curves during application.
This product is categorized as edgebanding, so it is applied to exposed panel edges on cabinets, furniture parts, and similar wood-based components.
The product is offered by Wurth Baer Supply, a specialty wholesale distributor to the woodworking industry.
Rehau PVC Edgebanding, 302597-080 pairs a 1-5/16 inch width with a 3mm thickness to create a substantial PVC edge for woodworking projects. The FLEX designation and 300FT length support shop workflows that need flexible edge material over longer runs. For panel edges in cabinet or furniture production where this width, thickness, and roll length match the job requirements, this edgebanding provides a clearly defined option.
Sold In: 1 Roll