Rehau PVC edgebanding 302597-125 1-5/16 x 3mm

Rehau PVC Edgebanding For Professional Woodwork

Rehau PVC edgebanding, identified by manufacturer part 302597-125, provides a PVC edge banding solution that covers raw edges on boards so finished parts present a clean, usable edge instead of exposed core material. The product class is Edge Banding, so it serves as the finishing strip along panel edges, bringing a defined termination point that supports accurate sizing during fabrication. The SAP description states 1-5/16X3MM FLEX CP21156 EMB LAC 300FT, indicating an approximate 1-5/16 inch wide, 3 mm thick flexible PVC strip supplied in a 300-foot length, which supports running multiple cabinet or fixture jobs from a single roll without constant changeover. The flexible designation means the band is intended to form over edges while staying in contact along the length, helping maintain consistent coverage around straight runs and gentle transitions.

Key Rehau Edge Banding Details For Projects

• The SAP description 1-5/16X3MM FLEX CP21156 EMB LAC 300FT indicates about 1-5/16 inch width and 3 mm thickness, giving substantial edge coverage that aligns well with thicker panels and helps create a solid-feeling edge line along cabinet and furniture parts.
• The FLEX notation in the SAP description describes a flexible construction, allowing the PVC strip to follow typical panel edges while maintaining contact, which supports reliable adhesion performance when paired with a suitable edgebanding workflow.
• The 300FT length stated in the SAP description concentrates a long run of material on one roll, which reduces changeovers during repetitive cutting and banding tasks and supports efficient processing of multiple panels in sequence.
• The brand designation Rehau, Inc. ties this PVC edge banding to a recognized edge banding manufacturer, which helps shops coordinate color and material choices across projects that specify Rehau edge solutions.
• The product class Edge Banding and category Miscellaneous|Edgebanding identify this item as a dedicated edge treatment component, keeping it in the same workflow as other panel finishing steps so operators can stage it where edging is performed.

Edgeband Dimensions And Fit In Shop Workflows

The SAP description 1-5/16X3MM FLEX CP21156 EMB LAC 300FT provides dimensional guidance that directly affects panel preparation and edgebander setup, because the approximate 1-5/16 inch width determines how much overhang can be trimmed after application. The 3 mm thickness, expressed in the same description, defines how the finished edge transitions to the panel face, which influences tooling choices for trimming and profiling passes. Having a single 300-foot length supports setups where operators feed consecutive parts through an edgebanding station without stopping to change rolls, which helps maintain consistent settings and edge quality from the first part to the last in a run.

Where This Rehau PVC Edgebanding Fits In Use

Using Rehau Edge Banding In Woodworking Projects

The brand Rehau, Inc., combined with the product class Edge Banding, positions this PVC edgebanding for applications where panel edges need a finished treatment, such as cabinetry, casework, or furniture built from sheet goods. The approximate 1-5/16 inch width given in the SAP description 1-5/16X3MM FLEX CP21156 EMB LAC 300FT provides enough coverage for common panel thicknesses, so fabricators can plan for slight overhang and then trim back to a flush edge. The 3 mm thickness stated in the same description produces a more substantial edge profile than thin tape-style edging, which can support designs that call for a more pronounced, durable-feeling edge detail. Because the category is Miscellaneous|Edgebanding, this product fits naturally into existing edgebanding tasks in a shop, occupying the same material lane as other edge treatments that protect and visually finish exposed cores.

Why The Flexible 1-5/16 x 3mm Design Matters

The term FLEX in the SAP description indicates that this Rehau PVC edgebanding is intended to flex as it is applied, which helps the strip stay seated against edge surfaces as parts move through an edgebanding operation. That same description lists a 300FT length, meaning the material is supplied in a long continuous run that supports uninterrupted processing of multiple components using one setup, reducing handling between batches. The approximate 1-5/16 inch width works with standard trimming tools to create a clean edge transition after application, so operators can dial in cutters to remove overhang while protecting the panel face. The 3 mm thickness defines how much material is available for those trimming and profiling passes, which supports consistent results from part to part when the same machine settings are used across a job.

Common Questions About Rehau PVC Edgebanding 302597-125

Select Rehau PVC Edgebanding For Edge Finishing

Choose Rehau PVC edgebanding, 302597-125, when a PVC Edge Banding solution is needed to finish exposed panel edges with an approximate 1-5/16 inch wide, 3 mm thick flexible strip. The 300-foot length defined in the SAP description 1-5/16X3MM FLEX CP21156 EMB LAC 300FT supports extended runs of cabinet or furniture components from a single roll. Sourcing this Edge Banding through Wurth Baer Supply connects the material to a distributor focused on the woodworking industry, streamlining acquisition alongside other shop supplies and components for panel processing.