Rehau PVC edgebanding 302597-135 is a PVC edge banding that covers and protects raw panel edges, so cabinet and furniture projects finish with a consistent edge. The 1-5/16 inch width gives coverage for common panel thicknesses, allowing slight overhang for trimming, which supports tight visual lines along cabinet sides and shelves. The 3mm thickness creates a substantial edge profile that stands out compared to thin tape-style edges, helping panels feel more solid at doors and high-contact edges.
The flexible construction referenced by FLEX in the SAP description indicates that this PVC edgebanding can follow typical straight runs while handling modest curves, which is useful on modern cabinet designs with softened corners. The CP20834 EMB LAC designation in the SAP description identifies a specific surface and finish combination within the Rehau line, giving shops a repeatable choice when matching existing jobs that used the same code. The 300FT length described in the SAP text provides a long run for multiple parts or several cabinets in a single roll, reducing changeovers during edge-banding operations.
The 1-5/16 inch width documented in the SAP description gives installers enough material to center the strip on typical panel edges and then trim both sides, which supports precise alignment when using edge banding equipment. The 3mm thickness described for this Rehau PVC edgebanding works well where a more robust edge is needed, such as cabinet doors and exposed shelf fronts, because the thicker edge offers a defined radius after trimming. The 300FT length in the SAP description supports continuous feeding on edgebanders during production runs, limiting roll changes on repetitive cabinet components and keeping workflow steady across multiple pieces.
This Rehau PVC edgebanding, identified as 302597-135, is built as an edge banding for covering raw board edges, which aligns with jobs using panel goods in cabinets, furniture, and casework. The 1-5/16 inch width from the SAP description lets shops run banding on standard panel thicknesses while leaving enough material for trimming, supporting tight alignment along both faces. The 3mm thickness defined in the SAP text gives designers and builders a thicker edge style that works well on frameless cabinet doors and countertops, where a more pronounced front edge is preferred.
The FLEX notation in the SAP description indicates a flexible band that suits common straight runs while allowing some curvature, which matters when edging cabinet sides with eased corners or modest radiused elements. The CP20834 EMB LAC designation describes a specific finish combination inside the Rehau system, so shops that specify this code can return to the same 302597-135 part number for future phases or matching repairs, maintaining visual continuity across a project line.
The manufacturer part number 302597-135 ties directly to the SAP description "1-5/16X3MM FLEX CP20834 EMB LAC 300FT," which connects width, thickness, flexibility, finish code, and roll length into a single identifier, simplifying reordering after a successful run. The 300FT length stated in the SAP description supports extended production on edgebanders or manual setups without frequent roll changes, which helps maintain consistent heat, feed, and trimming settings across many parts.
Because the product name specifies Rehau PVC edgebanding and lists the 302597-135 identifier, project documentation can record this exact edge choice for future jobs, helping shops standardize materials across cabinet lines. The connection to the Edge Banding product class and Edgebanding category clarifies that this item is intended for edging applications, guiding it toward use on cabinet and furniture edges where a PVC perimeter is desired.
Rehau PVC edgebanding 302597-135 is described as 1-5/16 inches wide and 3mm thick, which supports edging standard panel thicknesses while providing a substantial front edge profile for visible cabinet and furniture parts.
The SAP description lists FLEX, indicating a flexible PVC edgebanding construction that can handle typical straight runs and modest curves, helping it follow standard cabinet edges and light radiused designs in woodworking projects.
The SAP description specifies 300FT, giving a long roll suited for multiple cabinets or extended runs, which supports consistent banding setup across many parts before changing to a new roll.
The CP20834 EMB LAC reference in the SAP description identifies a particular Rehau surface and finish combination, aiding projects that need the same coded appearance on repeat or expansion work.
This Rehau PVC edgebanding with 3mm thickness and 1-5/16 inch width suits cabinet, furniture, and casework edges where a thicker, defined PVC edge profile is desired on visible fronts and exposed panel sides.
The Edge Banding product class and Edgebanding category confirm this Rehau 302597-135 item is designed specifically for covering panel edges, guiding it toward cabinet and woodworking edging operations.
The Rehau PVC edgebanding 302597-135 combines a 1-5/16 inch width, 3mm thickness, flexible construction, and CP20834 EMB LAC finish code into one defined edge solution for cabinet and furniture projects. The 300FT length described in the SAP text supports extended runs on edgebanders or manual setups, keeping edge appearance uniform across many components. For shops documenting materials by part number, the 302597-135 identifier makes it straightforward to repeat the same PVC edge choice on future jobs that rely on this Rehau banding.
Sold In: 1 Roll