Rehau PVC edgebanding identified as 302597-138 provides a PVC edge banding solution under the Rehau, Inc. brand, giving cabinet and woodworking projects a defined edge treatment that follows a consistent product standard on every job. The edgebanding falls under the Edge Banding product class, so it is intended to cover and finish exposed panel edges where a durable strip is needed along board sides. The SAP description "1-5/16X3MM FLEX CP41318 EMB LAC 300FT" indicates the piece is sized at 1-5/16 inches wide and 3mm thick in a flexible format, so it can match common panel thicknesses while wrapping edges along straight runs. The same description specifies a 300ft length, so one roll supports longer production runs or multiple installations before material changeover is required.
The SAP description "1-5/16X3MM FLEX CP41318 EMB LAC 300FT" defines the edgebanding size and format, giving installers a clear profile to plan around when setting up their edge application process. With a 1-5/16 inch width, the banding provides enough coverage to span typical panel edges while leaving room for trimming to final size, which allows a clean edge after cutting or routing back to the board face. The 3mm thickness indicated in the same description sets the material in a thicker banding category, so installers can anticipate how it will sit on the substrate edge during bonding. The 300ft length noted in the SAP description supports repetitive installation steps, because the long run reduces interruptions related to material changeover.
The product name "Rehau PVC Edgebanding, 302597-138" identifies this item as a PVC edge banding option from Rehau, Inc., positioning it for projects where a plastic strip is applied over exposed panel edges to finish cabinetry or other wood-based assemblies. The Category line placing it in "Miscellaneous|Edgebanding" reinforces its role as an edge treatment product rather than a structural component, directing it toward cabinet sides, shelves, or similar board edges where only the edge surface needs coverage. Within the product class of Edge Banding, this Rehau PVC edgebanding can be aligned with shop processes that use edge banding equipment or manual methods, letting fabricators assign it to jobs where a PVC edge strip is specified. The SAP description noting a 300ft length supports use in workflows where a single color or style runs across multiple panels in succession.
The combined width and thickness in the SAP description, "1-5/16X3MM," give installers a defined cross-section so they can predict how far the banding will extend beyond the panel during application, which influences trimming passes and the visual proportion of the finished edge. The designation FLEX in the same description indicates a flexible form, helping the strip conform along typical straight panel edges while being manageable during feeding and alignment, which contributes to a cleaner bond line when applied with suitable processes. The 300ft length specification directly supports repeatability, because one continuous length can run through multiple parts without changing material, reducing variation that could occur if shorter segments were used on the same project. The manufacturer part number 302597-138 links all of these traits to a single Rehau, Inc. reference, so shops can consistently pull or order the same edgebanding when they want to reproduce an established edge appearance on later work.
Rehau 302597-138 is a PVC edgebanding in the Edge Banding product class, so it serves as a strip applied to finish exposed panel edges on cabinetry or similar projects.
The SAP description lists the edgebanding as 1-5/16 inches wide and 3mm thick, providing a defined cross-section that guides trimming and alignment along panel edges.
The SAP description specifies a 300ft length, allowing extended runs across multiple parts so shops can handle repeated edging tasks with fewer material changeovers.
The word FLEX in the SAP description indicates a flexible form, which helps the PVC edgebanding conform along standard straight panel edges during typical edge banding operations.
This edgebanding is produced under the Rehau, Inc. brand, giving shops a defined manufacturer reference when aligning edge materials with other Rehau components.
The manufacturer part number 302597-138 and the description "1-5/16X3MM FLEX CP41318 EMB LAC 300FT" identify this specific Rehau PVC edgebanding for future orders.
Rehau PVC edgebanding 302597-138 from Wurth Baer Supply links a Rehau, Inc. manufacturer part number with a 1-5/16 inch by 3mm flexible PVC strip in a 300ft length, so shops can assign a known edge material to current and future projects requiring that profile.
Sold In: 1 Roll