Rehau PVC edgebanding 302597-142 is a Rehau, Inc. edge banding designed to finish exposed panel edges in woodworking projects. The SAP description 1-5/16X3MM FLEX CP40357 EMB LAC 300FT identifies it as a flexible PVC strip that covers raw board edges so panels present a uniform edge instead of open core material. The 1-5/16 inch width gives coverage that suits common board thicknesses where a wider band is needed to span the face and edge cleanly. The 3mm thickness provides a substantial edge profile that stands up to handling while giving the edge a solid, finished feel on cabinets and fixtures. The 300FT length in the SAP description indicates a continuous roll format, which lets you run multiple parts from one coil and set up repeatable edge-banding passes with fewer changeovers during production.
The 1-5/16 inch width on this Rehau PVC edgebanding sets a predictable setup dimension when aligning pressure rollers and trimming units on edge-banding equipment. The 3mm thickness gives a known material build that operators can use when dialing in cutter height and flush-trim settings. Because the SAP description identifies the product as FLEX CP40357 EMB LAC, shops can associate this specific flexible PVC formulation and style with existing programs or jigs that are already tuned around this profile. The 300FT roll length supports planning cut lists around a single coil, helping maintain consistent feed tension and edge quality from the first panel to the last in a run.
This Rehau PVC edgebanding, classified as Edge Banding and sized at 1-5/16 inch by 3mm, fits applications where panels need a sturdy, pronounced edge profile. The 3mm thickness creates an edge that feels solid when doors or panels are gripped, which suits cabinetry, casework, and similar woodworking projects that see regular handling. The flexible designation in the SAP description (FLEX CP40357 EMB LAC) points to a PVC band that works around typical straight and mildly contoured edges in shop workflows. With a 300FT length per roll, the product supports jobs ranging from small runs to larger batches by giving enough material to edge multiple cabinets, shelves, or fronts from a single coil, which keeps edge appearance uniform throughout a project.
The 1-5/16 inch width and 3mm thickness listed in the SAP description give fabricators fixed dimensions they can build into machine setups and job standards. That width provides extra material beyond common board thickness, allowing trimming tools to leave a clean, flush edge on both faces without cutting into the substrate. The 3mm build gives trimmers and scrapers a solid surface to work against, which supports smoother passes and consistent reveal lines along cabinet doors and panels. Identifying the material as PVC edgebanding under Rehau, Inc. and manufacturer part 302597-142 lets shops tie this band directly to color and finish programs they track by part number, so replacement pieces or future additions can match the original edge banding selection. The 300FT roll length, described in the SAP text, also streamlines planning for repeat jobs, since estimators can translate linear edge requirements into predictable roll counts taken from that stated coil length.
Rehau PVC edgebanding 302597-142 is described as 1-5/16X3MM, giving a 1-5/16 inch width and 3mm thickness, which defines how much edge it covers and how heavy the finished edge profile feels.
The 3mm thickness provides a substantial PVC edge that offers a more robust edge profile, giving panels a solid-feeling edge suitable for cabinetry and similar woodworking uses.
The 300FT length in the SAP description means each roll supplies 300 feet of material, supporting extended edge-banding runs before a roll change is needed during a job.
Rehau 302597-142 is classified as PVC Edge Banding in the Edgebanding category, so its role is to finish exposed panel edges in woodworking applications.
The 1-5/16 inch width gives extra coverage over typical board thicknesses, allowing flush trimming on both faces while keeping the panel substrate edge concealed.
The manufacturer part number 302597-142 precisely identifies this Rehau PVC edgebanding, helping shops reorder the same edge material to match existing work.
Rehau PVC edgebanding 302597-142 combines a 1-5/16 inch width, 3mm thickness, and 300FT roll length to support efficient, repeatable edge finishing on panels and casework. The clear Rehau, Inc. part number and Edge Banding classification let you align this material with existing programs, drawings, or job standards that call for this specific band. For cabinet, fixture, or general woodworking runs that need a solid-feeling PVC edge and predictable setup dimensions, this Rehau PVC edgebanding 302597-142 provides the defined size and roll length needed for straightforward planning and consistent edge results.
Sold In: 1 Roll