Rehau PVC edgebanding 302597-146 is a PVC edge banding from Rehau, Inc. that covers and protects raw board edges, giving sheet goods a finished, uniform look on visible sides. The 1-5/16 inch width stated in the SAP description matches common panel thickness needs where a small overhang is preferred for trimming, which helps installers achieve a straight, flush edge after final pass. The 3mm thickness specified in the product information creates a substantial edge profile that stands up to regular use in cabinetry and casework, adding visual definition while protecting the substrate. The FLEX notation in the SAP description identifies this as a flexible PVC edgeband, which allows it to follow slight curves and variances in panels more easily during installation. The 300 ft length in the description provides extended run capability, supporting larger projects or repeat use without frequent reordering.
The 1-5/16 inch width and 3mm thickness identified in the SAP description define how this PVC edge banding seats on typical woodworking panels, giving installers known dimensions for edgebander or manual application setup. That width provides coverage beyond the face of many standard boards, which allows trimming back to a precise edge instead of fighting a short strip. The 3mm thickness works with common edgebanding cutters and trimmers set for thicker decorative edges, supporting consistent cleanup passes. The FLEX notation signals a flexible PVC construction, which helps the edgeband conform to minor panel variations during application for a more even bond line and a smoother finished result.
The product class listed as Edge Banding and the category listing under Edgebanding place Rehau PVC edgebanding 302597-146 directly in cabinet, furniture, and general woodworking edge finishing workflows, where raw substrate edges need a durable cover. The 1-5/16 inch width noted in the SAP description suits many panel and case side builds that target a slightly proud edge before trimming, supporting both shop-built cabinetry and commercial fixtures. The 3mm thickness gives designers and builders a thicker edge line suited to applications where a more pronounced band is desired, such as vertical cabinet sides or open shelving. The 300 ft length described enables this PVC edge banding to serve in production or repeat-job environments, where running the same color and profile across multiple cabinets or case pieces is important for a uniform appearance across an installation.
The combination of 1-5/16 inch width and 3mm thickness from the SAP description provides consistent dimensions that integrate with standard edgebanding equipment settings, reducing time spent testing and adjusting for each run. That defined width gives a predictable amount of overhang when aligned to panel faces, which simplifies trimming and helps reduce rework from undersized strips. The FLEX label in the description signifies that this PVC edgebanding is designed with flexibility, which helps it stay seated along edges even when the substrate has minor inconsistencies. By pairing the flexible characteristic with a 300 ft length, shops can move from piece to piece without changing material, which supports repeatable results and visual continuity across a full project built with the same Rehau PVC edgebanding 302597-146.
Rehau PVC edgebanding 302597-146 is an edge banding product from Rehau, Inc. that finishes and protects exposed board edges in woodworking, providing a defined PVC edge along cabinet and panel work.
Rehau PVC edgebanding 302597-146 has a stated width of 1-5/16 inch and a thickness of 3mm, giving installers a generous trim allowance and a substantial edge profile for cabinetry or casework.
The FLEX notation in the SAP description indicates flexible PVC construction, allowing the edgeband to conform more easily to panel edge variations and support smoother seating along the run.
Rehau PVC edgebanding 302597-146 is described with a 300 ft length, supporting extended runs and helping shops handle multiple pieces or projects with the same material.
The 3mm thickness specified in the product data provides a thicker decorative edge, which adds impact resistance at corners and gives cabinets and panels a pronounced finished line.
The manufacturer part number 302597-146 clearly identifies this specific Rehau PVC edgebanding, which helps shops match material on repeat jobs and maintain consistent appearance across projects.
The defined 1-5/16 inch width, 3mm thickness, and FLEX designation in the SAP description position Rehau PVC edgebanding 302597-146 as a practical option for finishing cabinet and panel edges with consistent dimensions. The 300 ft length supports both shop and field needs where repeated use of the same edge profile is important. The clear identification as Rehau PVC edge banding with manufacturer part number 302597-146 makes it straightforward to align this product with existing jobs that call for this specific edgeband. For woodworking projects that rely on predictable sizing and flexible PVC construction, this Rehau PVC edgebanding helps streamline edge finishing work.
Sold In: 1 Roll