Rehau PVC edgebanding identified as 302597-150 is an edge banding product from Rehau, Inc. that finishes raw panel edges, so exposed substrate is covered for a more completed cabinet or furniture build. The product is classified as Edge Banding, which means it is intended to be applied along board edges, turning cut sheet stock into job-ready components. The SAP description specifies dimensions of 1-5/16 x 3mm, so it covers edges in that width while providing a 3mm thick edge, which gives a more substantial edge profile. The same description specifies a 300FT length, so one roll serves multiple parts or a small production run without frequent changeovers. The description also notes FLEX, which indicates a flexible construction that helps the banding follow standard cabinet and furniture edge runs.
The SAP description specifies a 1-5/16 inch width, so the banding is sized to extend past typical panel faces before trimming, which provides enough material for clean trimming operations. The same description specifies a 3mm thickness, so it creates a thicker edge profile that can visually match other 3mm banded parts in a project. The 300FT notation defines the run length on a roll, which supports planning for how many linear edges can be processed from a single roll. Because the product is PVC edge banding, it fits workflows built around PVC trimming, scraping, and finishing methods already common in woodworking shops.
The product is classified as Edge Banding in the Edgebanding category, so it is suited for covering exposed edges on panel-based construction such as cabinets, casework, and similar furniture components. The SAP description states dimensions of 1-5/16 x 3mm, so it is geared toward edge applications that benefit from a 3mm thick band, such as doors, drawer fronts, or panels where a more pronounced edge is desired. Being PVC edgebanding, it aligns with panel and cabinet builds that already rely on thermoplastic edges, so it fits into environments where PVC edges are trimmed and finished as part of the normal process. The 300FT roll length supports runs where multiple panels share the same edge treatment within a single project cycle.
The stated 1-5/16 inch width provides overhang on both sides of common panel thicknesses before trimming, which helps installers feed parts through edgebanders or handle manual trimming without starving the cutter of material. The 3mm thickness from the SAP description creates a measurable edge layer, so repeated use produces a consistent visual line across cabinet fronts or panel groups. Because the SAP description calls out FLEX for this PVC edgebanding, the material is designed to conform along standard straight edge runs, which supports reliable adhesion and trimming performance on typical cabinet and furniture edges. The 300FT length helps maintain consistency across a full job because all edges can be banded from the same roll, so color and profile remain steady from the first piece to the last.
Rehau 302597-150 PVC edgebanding is described as 1-5/16 x 3mm and 300FT, so it provides a 1-5/16 inch wide, 3mm thick edge over a 300-foot roll for multiple panels.
The 3mm thickness in the SAP description gives a pronounced edge profile, so cabinets, doors, or panels finished with this edgebanding have a thicker, more defined edge line.
The 1-5/16 inch width offers extra material beyond common panel faces, so edges can be trimmed back cleanly after application without exposing the core.
The FLEX note in the SAP description indicates a flexible PVC construction, so the banding follows normal straight edge runs and supports smooth feeding and trimming.
The 300FT length lets a shop run many edges from a single roll, so a group of cabinets or panels can share the same edge material during one production run.
Rehau 302597-150 is a PVC edge banding product in the Edgebanding category, so it is intended to cover raw edges on panel-based woodworking components.
The Rehau PVC edgebanding 302597-150 provides a 1-5/16 inch wide, 3mm thick edge profile over a 300FT roll, so one product can serve multiple doors, drawer fronts, or panels in a project. Its classification as Edge Banding and the PVC construction tie directly into cabinet and furniture workflows that already rely on PVC edges. For shops planning runs that need consistent 3mm edges across many parts, this roll-based format supports both production continuity and alignment with existing edgebanding equipment and methods.
Sold In: 1 Roll