Rehau PVC edgebanding 302597-152 1-5/16 x 3mm

Rehau PVC Edgebanding 302597-152 For Clean Edges

Rehau PVC edgebanding 302597-152 is a Rehau, Inc. edge banding designed to finish exposed panel edges with a consistent PVC surface, giving cabinetry and casework a uniform, professional edge treatment across each run. The SAP description "1-5/16X3MM FLEX CP40846 EMB LAC 300FT" identifies this product as 1-5/16 inches wide and 3mm thick, so it matches panel edges that call for that specific width and thickness in shop drawings. The flexible PVC construction described in the SAP text allows the banding to follow standard cabinet edge profiles, helping panels present a continuous line when trimmed and flushed. The 300FT length called out in the description provides a long run from a single roll, which supports production work or multiple smaller jobs using the same color and profile without frequent roll changes.

Key Rehau PVC Edge Banding Job Advantages

• The SAP description lists a 1-5/16 inch width, so this edgebanding covers common panel thicknesses with slight overhang, which allows flush trimming back to the board for a clean finished edge.
• The 3mm thickness described in the SAP text gives a substantial edge profile that stands out more than thin tape, which helps edges read as solid and reduces the visual impact of substrate lines in many cabinet builds.
• The word FLEX in the SAP description indicates a flexible construction, which lets the banding conform to typical straight runs and mild edge transitions, supporting smooth application along standard casework edges.
• The 300FT length specified in the SAP description supplies an extended continuous run, which reduces splice points along cabinet edges and supports more consistent color and profile across multiple components in one project.

Edgebanding Size And Roll Format For Installation

The 1-5/16 inch width called out in the SAP description gives installers extra material beyond standard panel thickness, which provides enough margin for trimming tools to work accurately without exposing the core. The 3mm thickness defined in the same description creates a measurable edge for routers or trimmers to follow, helping maintain a straight reference when flushing to the substrate. The product class listed as Edge Banding confirms this material is intended specifically for edge finishing, so it fits naturally into established cabinet and casework edge-banding workflows. The 300FT roll length identified in the SAP text lets shops process multiple parts from one continuous strip, which can streamline handling at the edgebander or manual station and limit changeover time between pieces.

Using Rehau 302597-152 Edgebanding In Woodworking

Where This Rehau PVC Edgebanding Fits Best

The category listing as Edgebanding and the product class Edge Banding show that Rehau PVC edgebanding, 302597-152, is intended for finishing the raw edges of panels in woodworking projects, particularly where a consistent PVC edge is specified. The SAP description "1-5/16X3MM FLEX CP40846 EMB LAC 300FT" defines a 1-5/16 inch by 3mm flexible strip, which aligns with applications on cabinet sides, shelves, and similar panel-based components that need a durable-feeling edge profile. The flexible nature referenced by the word FLEX in the description supports use along straight cabinet edges and comparable case goods, so one roll can service a range of rectangular parts in a shop. The 300FT roll length noted in the SAP description suits repetitive production where the same CP40846 EMB LAC color and specification must carry through an entire job, helping maintain visual continuity from piece to piece.

Why These Dimensions Support Repeatable Edge Results

The specified 1-5/16 inch width gives consistent overhang relative to many standard panel cores, which means trimming operations can be set up for that dimension and repeated across parts without constant adjustment, aiding throughput on cabinet runs. The 3mm thickness stated in the SAP description provides a predictable edge size that trimming and routing stations can reference, supporting stable setups when switching between different panels that all use this same Rehau PVC edgebanding 302597-152. The designation FLEX in the SAP text indicates that the banding is made to bend along normal panel edges, which helps the material seat reliably during application and contributes to uniform adhesion and appearance along the length of the workpiece. The defined 300FT roll length also means that once a machine or manual process is dialed in for this edge banding, that same setup can carry through a large number of parts from a single roll, supporting consistent results across a full project.

Common Questions About Rehau 302597-152 Edgebanding

Select Rehau 302597-152 For 1-5/16 x 3mm Edges

Rehau PVC edgebanding, 302597-152, pairs a defined 1-5/16 inch width with a 3mm thickness, giving shops a clearly specified band for panel edges built around that dimension. The flexible construction referenced in the SAP description and the 300FT roll length support repeatable, project-wide use on cabinet and casework runs needing this CP40846 EMB LAC version. For work that depends on consistent PVC edges from part to part, this Rehau, Inc. edge banding supplies a single, clearly identified option to align with drawings and material lists.