Rehau PVC edgebanding 302597-153 1-5/16 x 3mm 300ft

Rehau PVC Edgebanding 302597-153 For Clean Edges

Rehau PVC edgebanding 302597-153 is a PVC edge banding from Rehau, Inc. that covers and protects raw panel edges, so cabinet and fixture work presents a finished appearance. The 1-5/16 inch width matches common panel thickness situations where a bit of overhang is useful for trimming flush, helping produce straight, clean lines on doors, shelves, and casework. A 3mm thickness adds a solid edge profile that stands up to everyday use, which matters when panels see repeated contact in shops, offices, or residential spaces. The FLEX designation identifies this as a flexible PVC material, allowing the tape to follow standard straight runs and gentle contours without fighting the substrate. The CP60229 reference and EMB LAC description identify an embossed and lacquered surface, giving panels a textured, coated edge that visually upgrades basic sheet goods. The 300ft length supports longer runs and multiple projects from a single roll.

Key Edgebanding Details That Support Shop Work

• The 1-5/16 inch width gives extra material beyond panel thickness for trimming, which helps installers create a tight, flush edge with less risk of exposing core material along the run.
• The 3mm thickness produces a robust edge profile, so finished panels feel substantial at the touchpoint and handle regular contact on cabinet fronts, drawer edges, and shelving.
• The FLEX PVC construction allows the edgebanding to conform to typical straight edges and mild curves, which simplifies handling during application and reduces waste from cracking or kinking.
• The CP60229 EMB LAC description identifies an embossed, lacquered surface that provides a textured, coated appearance, helping edges visually coordinate with matching or complementary decorative surfaces.
• The 300ft roll length supports longer cabinet or furniture jobs, letting shops run multiple pieces from one continuous strip to maintain color and texture consistency across a project.

Edgebanding Size And Finish For Installation Results

The 1-5/16 inch width on Rehau PVC edgebanding 302597-153 leaves margin on both sides of typical panel thicknesses, which gives installers room to trim without risking a short edge reveal. The 3mm thickness means the edge has enough material for precise flush trimming and light profiling, supporting repeatable visual lines from part to part. The FLEX PVC construction helps the banding sit snug against the substrate during application, which is important for achieving uniform adhesion and minimizing edge gaps. The CP60229 embossed and lacquered surface provides a defined face that guides trimming tools along a consistent plane, so installers can work quickly while keeping the decorative side protected. The 300ft roll format keeps the same color and texture across many pieces in a run, reducing variation between doors, drawer fronts, and panels.

How This Rehau Edgebanding Fits Cabinet Projects

Where Rehau PVC Edgebanding 302597-153 Is Used

Rehau PVC edgebanding 302597-153 is positioned as an edge banding solution for covering exposed panel edges in cabinet, furniture, and fixture construction. The 1-5/16 inch width supports use on common thickness sheet goods where a slight overhang helps during trimming, such as cabinet sides, tops, bottoms, and shelves. With a 3mm thickness, the banding builds a noticeable edge detail on drawer fronts and doors, which can visually complement hardware lines and surrounding profiles. The FLEX PVC construction allows the material to follow straight cabinet edges and modest curves in counters or furniture ends, so a single product can address multiple edge types within the same project. The CP60229 EMB LAC designation indicates an embossed, lacquered surface that suits decorative applications where the edge needs to match or enhance the face material rather than look like a simple cover strip.

Why These Edgebanding Details Support Consistent Results

The 1-5/16 inch by 3mm format of Rehau PVC edgebanding 302597-153 provides both height and thickness for controlled trimming, which helps shops repeat accurate edges across production runs. Extra width reduces the likelihood of under-coverage if panels vary slightly, keeping core material hidden even when parts are cut from different sheet batches. The 3mm thickness gives enough depth for trimmers and routers to track smoothly without chattering, which matters when aiming for clean corners and tight seams. The FLEX PVC material works with common application equipment and techniques, allowing the banding to seat closely along the substrate and reducing tension that can lead to lift or curl at ends. The embossed, lacquered CP60229 surface presents a defined decorative face, helping installers orient the banding correctly and maintain a consistent visual across multiple parts. With a 300ft roll, a shop can edge many components from the same lot, supporting color and texture continuity on full kitchens, office suites, or fixture runs.

Common Questions About Rehau PVC Edgebanding 302597-153

Choose This Rehau Edgebanding For Panel Edges

Rehau PVC edgebanding 302597-153 combines a 1-5/16 inch width, 3mm thickness, FLEX PVC construction, and CP60229 embossed lacquered surface in a 300ft roll, giving shops a defined option for edging cabinet, furniture, and fixture panels with consistent visual results.