Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding 302597-156 provides a PVC edge banding solution for finishing exposed panel edges on cabinetry and casework, giving a defined edge that visually completes panels and conceals core material. The 1-5/16 inch width stated in the SAP description, shown as 1-5/16X3MM, allows coverage of common panel thicknesses while leaving room for trimming to a flush, consistent edge. The 3mm thickness called out in the SAP description provides a substantial edge profile that can handle normal shop handling while delivering a solid visual band. The FLEX notation in the SAP description identifies this as a flexible edgeband, which helps the material follow straight runs and gentle curves during application. The CP60520 designation in the SAP description ties this edgeband to a specific Rehau program reference, supporting uniform appearance when the same reference is used across a project. The EMB LAC notation in the SAP description indicates an embossed lacquer finish, which creates a finished coating and surface texture along the edge for a more refined, consistent look on visible cabinet and furniture edges.
The SAP description value 1-5/16X3MM defines the physical profile of this Rehau PVC edge banding, which directly affects how it fits typical cabinet-grade panels and how it trims out after bonding. The 1-5/16 inch width offers coverage across standard panel thicknesses with margin on both sides, so trimming equipment can shave the overhang back to a clean, flush edge without exposing the panel core. The 3mm thickness provides enough material to form a noticeable edge radius or small bevel during finishing passes, supporting a consistent profile around doors, drawer fronts, and case edges. The EMB LAC designation in the SAP description indicates that the surface carries an embossed lacquer finish, which means the visible edge has a defined coating and texture that interacts predictably with normal shop handling and cleaning.
This product is identified as Rehau PVC edgebanding, 302597-156, in both the product name and manufacturer part number, tying it directly to edge finishing tasks on panel-based construction. The category listing as Edgebanding confirms its role as a banding material for covering raw edges on cabinetry, fixtures, and other panel assemblies. The SAP description specifies a 1-5/16 inch width, matching the needs of many cabinet and furniture shops that work with panel stock requiring a slightly oversize band for final trimming. Because the material is described as FLEX PVC edgebanding in the SAP description, it is suited to straight edges and gentle curves commonly found on cabinet sides, shelves, and vertical partitions. The CP60520 reference in the SAP description associates this edgeband with a defined Rehau program, which matters when the edge must visually coordinate with other components chosen under the same reference within a job.
The 3mm thickness stated in the SAP description allows this Rehau PVC edge banding to produce a substantial edge line that stands up to typical handling during fabrication and installation. That same thickness supports final profiling operations along the edge, giving installers enough material to create a small radius or easing without cutting through to the substrate. The FLEX designation in the SAP description signals that the edgeband is designed with flexibility in mind, which reduces resistance when working around mild curves or when guiding longer lengths along cabinet runs. The EMB LAC wording in the SAP description indicates an embossed lacquer surface, which creates a defined finish that looks complete immediately after trimming. The 300FT length noted in the SAP description provides extended run capacity from a single roll, helping shops handle multiple cabinet boxes or repeated parts in a project while maintaining the same appearance reference from beginning to end.
Rehau PVC edgebanding 302597-156 is described in the SAP description as 1-5/16X3MM, giving it a 1-5/16 inch width and 3mm thickness for substantial coverage and a trim-friendly edge profile.
This product is identified as Rehau PVC edgebanding, meaning it uses PVC material that provides a defined, durable-feeling edge presence on cabinets and panel components in woodworking projects.
The FLEX wording in the SAP description indicates a flexible edgebanding construction, which supports easier handling along straight runs and gentle curves commonly found on cabinet and furniture panels.
The EMB LAC notation in the SAP description refers to an embossed lacquer finish, giving the edge a textured and coated surface that visually completes exposed panel edges.
The SAP description lists a 300FT length, providing a long continuous run that supports multiple cabinets or casework sections while keeping the same appearance reference throughout the project.
The 3mm thickness in the 1-5/16X3MM SAP description gives enough material for trimming and light profiling, helping installers achieve a solid, consistent edge line without exposing the core.
Rehau PVC edgebanding 302597-156, identified by manufacturer part number 302597-156 and SAP description 1-5/16X3MM FLEX CP60520 EMB LAC 300FT, offers a defined PVC edge banding option for cabinetry and casework built from panel stock. The 1-5/16 inch width, 3mm thickness, FLEX construction, and EMB LAC embossed lacquer finish work together to cover exposed edges, support trimming and light profiling, and deliver a coordinated visual line when the CP60520 program reference is specified. For shops and installers sourcing from Wurth Baer Supply, this Rehau edgebanding provides a clearly documented size and finish combination that aligns with panel-based woodworking projects requiring a consistent edge treatment.
Sold In: 1 Roll