Rehau PVC edgebanding 302597-157 is a PVC edge banding from Rehau, Inc. that finishes exposed panel edges so they present a uniform look across cabinet or casework runs. The SAP description specifies 1-5/16 x 3mm dimensions, so this banding covers panel edges of that width while adding a 3mm thick edge that feels substantial in everyday use. The same description identifies this as FLEX PVC, which allows the edgebanding to follow normal cabinet and furniture edge runs without fighting the material around typical inside or outside contours. The designation CP10081 EMB LAC provides a defined finish and embossing reference, so the edge visually coordinates with matching panels sourced to that finish code. The 300FT length in the description supports longer production runs or multiple smaller jobs from a single coil, which helps installers and shops keep color and finish consistent across a full project.
The SAP description lists this Rehau, Inc. product as 1-5/16 x 3mm, so installers can select it when panel edge widths align with that coverage plus trim allowance, which supports efficient trimming without exposing substrate. The 3mm PVC thickness gives enough material for standard edge processing equipment to trim and buff while retaining a solid edge profile, helping maintain the finished look after machining. The CP10081 EMB LAC designation connects this edge banding to a defined embossed lacquer finish code, allowing fabricators to coordinate the edge appearance with matching surfaces that reference the same finish. Because the description identifies FLEX PVC material, common edgebanding application equipment can work with this profile as a flexible edging, supporting straightforward feed and wrap through typical machines.
This product sits in the Edgebanding product class and the Miscellaneous|Edgebanding category, so it is oriented toward finishing exposed board edges on cabinet, furniture, or similar panel-based assemblies. The 1-5/16 inch width from the SAP description targets panel edges in that coverage range, giving shops a banding that works well on panels sized for that width with extra material available for trimming to final flush. With 3mm thickness, the banding supports applications where a more robust edge is desired, such as door fronts, cabinet ends, or shelf fronts that see frequent contact during daily use. The FLEX PVC designation means the material is intended to act as a flexible edge banding, fitting typical straight runs and gentle curves often found in custom cabinetry or commercial millwork.
The clearly stated 1-5/16 x 3mm dimension in the SAP description gives fabricators a predictable edge profile to program into their edgebanding and trimming equipment, which helps repeat the same reveal and flush result across multiple parts. The specific CP10081 EMB LAC finish reference provides a consistent appearance target, so shops can pair this coil with panel stock or components carrying the same finish notation for uniform color and surface texture across all visible edges. The 300FT coil length supports batching work, allowing operators to run long sequences of doors, drawer fronts, or panels without changing over to another coil, which can reduce alignment adjustments between runs. As a Rehau, Inc. PVC edge banding identified under manufacturer part number 302597-157, the product gives shops a stable reference part for reordering, supporting consistent results on repeat projects that rely on the same edge look and dimensions.
Rehau PVC edgebanding 302597-157 is listed in the SAP description as 1-5/16 x 3mm, providing a 1-5/16 inch wide edge with 3mm thickness for panel edge coverage.
The FLEX notation in the SAP description identifies this as flexible PVC edge banding, so it is suited to standard edgebanding applications along straight runs and gentle curves in cabinet or panel work.
The CP10081 EMB LAC designation from the SAP description refers to a specific embossed and lacquered finish reference, helping align edge appearance with surfaces using the same finish code.
The 3mm thickness called out in the SAP description provides enough PVC material for standard trimming and finishing steps while maintaining a substantial edge profile on cabinet or furniture parts.
The 1-5/16 inch width from the SAP description covers panel edges in that range with trim margin, supporting flush trimming and consistent reveals along finished panel edges.
The 300FT length in the SAP description provides a long coil for multiple cabinets or panels, helping maintain consistent edge finish across a project without frequent coil changes.
This Rehau, Inc. PVC edgebanding, identified as manufacturer part number 302597-157 and described as 1-5/16 x 3mm FLEX CP10081 EMB LAC 300FT, gives shops a defined edge profile and finish code for cabinet and panel work. Wurth Baer Supply lists it under the Edgebanding product class, so it fits directly into existing edgebanding workflows where that width, thickness, and finish reference match the project. For fabrication runs calling for FLEX PVC in this 1-5/16 inch by 3mm format, this coil offers a repeatable choice tied to a specific Rehau finish designation.
Sold In: 1 Roll