Rehau PVC edgebanding, 302597-159, is a PVC edge banding designed to cover and protect exposed panel edges on woodworking projects. The 1-5/16 inch width allows this strip to cover thicker board edges, supporting use on panels that need a wider face coverage. The 3mm thickness gives the edge a substantial profile, creating a solid-feeling edge that stands up to regular handling on doors, shelves, or casework. The FLEX designation identifies this as a flexible PVC band, so it conforms around gentle contours and straight runs, helping maintain a consistent edge line. The CP41286 EMB LAC description identifies a specific decorative and surface combination, allowing alignment with matching components specified under the same reference. The 300FT length in the SAP description indicates a long run format, supporting extended production runs or multiple projects from a single roll without frequent material changeover.
The 1-5/16 inch width of this Rehau PVC edgebanding gives coverage for panel edges where a wider band is desired, allowing installers to trim back to a precise reveal along both faces. The 3mm thickness provides a stable edge section that works with standard trimming and flush-routing steps, giving enough material for a clean, square edge after machining. The flexible PVC formulation referenced by FLEX allows the strip to sit flat against the substrate along straight edges and gentle curves, supporting consistent adhesion and alignment in common edgebanding processes. The CP41286 EMB LAC identifier ties this banding to a specific decorative scheme, which matters when the edge needs to visually track with faces specified under that same reference in a project schedule.
This Rehau PVC edgebanding, classified under Edge Banding and Edgebanding categories, is intended for use on panel edges in woodworking applications. The 1-5/16 inch width supports use on thicker cabinet sides, shelves, and doors where more face coverage at the edge is needed. The 3mm thickness pairs well with applications that call for a more robust edge appearance, such as exposed ends of casework or work surfaces. The flexible PVC nature indicated by FLEX allows it to be used along straight cabinet runs and around gentle contours found in many furniture and fixture designs. The CP41286 EMB LAC reference ties the banding to a defined decorative family, so it fits jobs that specify that exact reference for coordinated surface appearance across parts.
The 1-5/16 inch by 3mm sizing gives predictable stock removal during trimming, supporting repeatable setups on edgebanders and routers once the tooling is dialed in. The thicker 3mm PVC edge supports clean machining at the corners, which helps reduce chipping at the edge during flush trimming. The FLEX description indicates the strip can follow typical panel geometry without fighting the substrate, which supports even pressure during bonding and reduces the chance of tension along the edge. The CP41286 EMB LAC decorative designation allows project planners to reference a single code for both surfaces and edges, simplifying repeat orders when the same look is required across multiple jobs. The 300FT length supports consistent output during repeated cabinet or furniture runs, because one roll can serve multiple components before a change is needed, which stabilizes settings and workflows on production equipment.
Rehau PVC edgebanding 302597-159 is described as 1-5/16 inch wide by 3mm thick, so it covers wider panel edges while providing a substantial edge profile for trimming and finishing.
The FLEX designation indicates this is a flexible PVC edge banding, helping it conform to straight runs and gentle curves so the edge follows typical cabinet and furniture geometries.
The 3mm thickness creates a robust edge, providing enough material for standard trimming operations and giving doors, shelves, and panels a more substantial finished edge profile.
The CP41286 EMB LAC reference ties this banding to a specific decorative scheme, fitting projects that call for that same reference across surfaces and edges for visual continuity.
The 300FT length supports extended cabinet or furniture runs, allowing consistent edging over many parts before changing rolls, which helps maintain stable equipment setups.
The 1-5/16 inch width provides generous coverage on thicker panels, allowing clean trimming on both faces and helping establish a consistent reveal along cabinet and furniture edges.
This Rehau PVC edgebanding, 302597-159, combines a 1-5/16 inch width, 3mm thickness, FLEX flexibility, and CP41286 EMB LAC decorative reference to serve edge finishing on woodworking panels. For projects calling for this exact size and reference, choosing this banding supports consistent edge appearance and predictable machining across runs.
Sold In: 1 Roll