Rehau PVC edgebanding 302597-167 is a PVC edge banding designed to finish exposed edges on wood-based components. The 1-5/16 inch width covers standard panel thicknesses with margin, so installers can trim back to a crisp, straight line without starving the edge. The 3mm thickness builds a solid edge profile, which supports more substantial corner radiuses where a narrow, fragile strip would be harder to machine. The flexible construction noted in the description helps the banding follow gentle curves on workpieces, reducing stress where straight, rigid material would fight the substrate. The CP40966 reference and embossed lacquer description identify a specific surface texture and lacquered finish, which lets shops repeat the same visual match across multiple jobs using this material. The 300 ft length is suited to production or multi-cabinet runs, limiting changeovers during continuous edgebanding work.
This Rehau PVC edge banding uses a 1-5/16 inch width to give installers room for alignment during application, then trim back to the final dimension without risking a short edge. The 3mm thickness presents a substantial PVC edge that responds well to typical edge-trimming and profiling steps, supporting clean transitions between the banded edge and the face of the panel. The flexible description indicates that the material is suited to standard edgebanding procedures where the strip needs to track evenly along the substrate. The CP40966 embossed lacquer surface provides a defined appearance, which helps maintain a uniform look when multiple pieces are edged and installed in the same project.
This Rehau PVC edgebanding, identified as 302597-167, is positioned as edge banding within the edgebanding category, so it serves as a finishing edge on wood-based panels. The 1-5/16 inch width works well where the panel thickness plus a small overhang are needed, giving room for the banding to be centered and then trimmed flush. With its 3mm thickness, the banding provides a noticeable, durable-feeling edge on cabinet parts, shelving, or other furniture components using this dimension range. The flexible nature supports use on straight edges and gentle curves in woodworking applications, helping the band stay in contact along the full run. The PVC composition aligns it with typical cabinet and casework construction using man-made boards in shop and installation environments.
The defined 1-5/16 inch by 3mm sizing means every length of this Rehau edge banding behaves the same in set-up, which simplifies machine adjustments between runs using the same stock. The 3mm thickness helps maintain a consistent reveal when profiling or lightly easing the edge, because there is enough material to hold a uniform shape. The CP40966 embossed lacquer surface gives a repeatable texture and sheen, so when shops specify this part number they can expect the same visible result on every project using it. The 300 ft roll length lets production teams run multiple cabinet components from one roll, reducing interruptions and helping maintain consistent feed and trimming conditions from the first piece to the last on that roll.
Rehau PVC edgebanding 302597-167 is specified at 1-5/16 inch width and 3mm thickness, so it provides extra coverage on typical panel thicknesses and a substantial edge for trimming and profiling.
The flexible construction helps the edgebanding follow straight runs and gentle curves, supporting continuous contact with the substrate and smoother edging on shaped or slightly curved components.
The CP40966 embossed lacquer reference identifies a specific textured and lacquered surface on the PVC edgebanding, which supports consistent appearance when repeating the same edge detail on multiple jobs.
The 300 ft length is suited to production or multi-cabinet projects, allowing longer runs of edging from a single roll and limiting stops to change material during continuous work.
This Rehau PVC edge banding is in the edgebanding product class, so it is used to finish exposed edges on wood-based panels in cabinetry, furniture components, and similar woodworking projects.
The 3mm thickness provides a more substantial PVC edge, giving extra material for shaping, easing, or profiling while maintaining a solid-looking finished edge on panels.
This Rehau PVC edgebanding 302597-167 combines 1-5/16 inch width, 3mm thickness, and flexible construction to support controlled edging on wood-based panels. The CP40966 embossed lacquer finish and 300 ft roll length suit repeat work where appearance and process consistency matter. For shops planning cabinet, furniture, or casework projects around this dimension range, this specific part number provides a defined size and surface that can be set up once and run across multiple components with matching results.
Sold In: 1 Roll