Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rehau PVC edgebanding identifies this product as a PVC edge banding solution from Rehau, Inc., which gives cabinet and woodworking projects a defined way to cover raw panel edges with a matching strip. The 1-5/16 inch width stated in the SAP description sets the coverage across the panel thickness and a small overhang, so installers can band standard substrate edges and trim back for a clean line. The 3mm thickness from the description provides a substantial band, which supports a pronounced edge profile after trimming and routing in shop or onsite work. The term FLEX in the description indicates a flexible construction, so the banding can follow straight runs and gentle contours without fighting the material during application. The CP60308 reference ties the banding to a specific color or design code, helping shops match this edge treatment to the corresponding surface material in repeat production.
The 1-5/16 inch width stated in the SAP description defines how this Rehau PVC edgebanding sits across the edge, allowing coverage of the substrate thickness with material remaining for trimming operations. The 3mm thickness described for the banding adds enough material at the edge to accept common trimming, scraping, and light routing without thinning out the visible edge. The FLEX notation in the SAP description indicates a flexible PVC structure, which helps the banding conform to the panel edge during application and supports steady feeding through suitable edgebanding machines. The 300FT length noted in the description means each roll supplies a substantial continuous run, which supports efficient throughput on production equipment or repeated passes on smaller jobs.
The 1-5/16 inch width specified in the SAP description sets this Rehau PVC edgebanding up for use on panels where the edge thickness plus slight overhang is desired, so fabricators can trim back to a clean, square finish. The 3mm thickness detailed for the product creates a noticeable edge band, which suits cabinet carcasses, shelving, and similar components that benefit from a more substantial edge profile in daily use. The CP60308 design reference in the description links the banding to a defined Rehau appearance, which supports projects where the panel face and edge need coordinated color or pattern for a unified look across multiple parts. The 300FT length mentioned in the data allows shops to run multiple cabinet or furniture components from a single roll, which supports batch work without frequent material swaps.
The 3mm thickness listed for this edge banding gives installers a stable amount of PVC to work with during trimming and finishing, which helps maintain a consistent radius or small chamfer along every edge. The FLEX characteristic noted in the SAP description means the PVC construction is suited to follow straight edges and gentle curves, which reduces stress on the bond line during application and promotes smooth contact along the substrate. The 1-5/16 inch width from the description provides room for slight alignment variation at the start of a run, because excess material can be trimmed from both sides to bring the edge into line. The CP60308 code ties to a specific Rehau design reference, which helps maintain visual consistency when different operators pull material for recurring jobs or replacement panels. The 300FT roll length described in the data supports repeatable machine setups, because the same roll can run through multiple batches, helping keep edge appearance uniform from part to part.
This Rehau PVC edgebanding is specified as 1-5/16 inch wide and 3mm thick, so it covers typical panel edges with extra material that can be trimmed back for a flush, finished result.
The FLEX designation in the SAP description indicates a flexible PVC construction, which lets the banding follow panel edges more easily and supports smoother feeding through suitable edgebanding equipment.
The CP60308 code identifies a specific Rehau design reference, so the edgebanding can be matched to corresponding panel or surface materials that share the same appearance code.
The 3mm thickness gives a substantial edge that can be trimmed and lightly routed, which supports a defined profile and helps the banding stand up to normal handling of finished components.
The 300FT length provides an extended continuous run, which supports multiple parts or full cabinet batches from one roll and reduces downtime caused by frequent material changeovers.
This Rehau PVC edgebanding, sized 1-5/16 inch by 3mm, is suited to edging cabinet panels, shelves, and similar components where a coordinated edge treatment with the CP60308 design is required.
The 1-5/16 inch width and 3mm thickness documented for this Rehau PVC edgebanding give shops a clear, repeatable edge treatment for cabinet and panel work. The FLEX construction and 300FT roll length described in the SAP data support efficient, continuous runs on suitable equipment. The CP60308 design reference ties the edge appearance to a specific Rehau look, helping maintain consistency when building or replacing coordinated components. Adding this Rehau edge banding to the shop inventory provides a known option whenever a project calls for this size and CP60308 design combination.
Sold In: 1 Roll