Rehau PVC edgebanding is a PVC edge banding product sized at 1-5/16 inches by 3mm, so it covers standard panel edges while adding a defined, consistent edge profile that suits cabinet and casework runs. The Rehau, Inc. brand and the edge banding product class identify it as a dedicated solution for finishing raw board edges, which helps transition cut substrates into visually finished components. The manufacturer part number 302597-174 ties this roll to a specific color and texture family, helping shops repeat jobs or match earlier installations with the same reference. The FLEX designation in the SAP description indicates a flexible construction, allowing the banding to follow gentle curves and panel irregularities in typical woodworking layouts. The 300FT length in the SAP description signals a long roll format that supports longer production runs and fewer changeovers between cabinets or project sections.
The 1-5/16 inch width described in the SAP line gives installers extra coverage beyond typical substrate thickness, allowing trimming on both sides for a straight, uniform edge once bonded. The 3mm thickness specified in the SAP description sets a clear material build at the edge, which interacts predictably with edgebanding equipment settings for pressure and trimming. The reference to FLEX in the SAP description indicates a flexible PVC body, which works well when feeding through standard edgebanding machinery or manual application processes on linear runs. The 300FT value in the SAP description signals a roll quantity suited to batch work, so a single roll can carry through full kitchens or multiple casework pieces in one job cycle.
The Category entry of Miscellaneous|Edgebanding and the Product Class of Edge Banding define this Rehau PVC edgebanding as a finishing material for exposed board edges in woodworking projects. The 1-5/16 inch by 3mm sizing in the SAP description makes it suitable for edging cabinet panels, doors, and shelves where a pronounced edge is desired. The 300FT roll length in the SAP description supports use in production-oriented shops that process multiple cabinet boxes or casework runs without frequent material changes. The FLEX identifier in the SAP description points to a flexible PVC structure that suits typical straight edges and mild contours found in many cabinet and furniture components.
The manufacturer part number 302597-174 links directly to the SAP description 1-5/16X3MM FLEX CP21177 EMB LAC 300FT, which creates a repeatable spec for shops building standards around this edgebanding. The 3mm thickness specified in the SAP description establishes a consistent trimming reference for edge banders, allowing tooling to be set once and used across many parts for uniform results. The 1-5/16 inch width described in the SAP data helps installers position the banding with adequate overhang, supporting precise top and bottom trimming without exposing the substrate. The CP21177 EMB LAC code in the SAP description identifies a defined finish and texture combination, which helps maintain visual continuity across doors, drawer fronts, and cabinet sides in the same project. The 300FT roll length from the SAP description is well suited to repeating the same edge profile across long runs, reducing interruptions and keeping workflow steady.
Rehau PVC edgebanding with part number 302597-174 is described as 1-5/16 inches wide by 3mm thick in the SAP description, giving a substantial edge suitable for trimming flush on typical cabinet panels.
Rehau PVC edgebanding is identified as PVC edge banding, so it uses a PVC formulation that supports consistent machining and trimming on cabinet and woodworking equipment.
Rehau PVC edgebanding with SAP description 1-5/16X3MM FLEX CP21177 EMB LAC 300FT is specified at 300 feet, providing extended length for batch cabinet or casework runs.
Rehau PVC edgebanding labeled FLEX in the SAP description indicates a flexible PVC construction, which helps it follow straight edges and mild curves during typical woodworking applications.
Rehau PVC edgebanding at 3mm thickness provides a pronounced edge profile, giving cabinet doors, drawer fronts, and panels a solid, defined edge line when trimmed flush.
Rehau PVC edgebanding with the CP21177 EMB LAC code in the SAP description uses that code to identify a specific finish configuration, supporting visual consistency across repeated jobs.
Rehau PVC edgebanding with manufacturer part number 302597-174 combines a 1-5/16 inch width, 3mm thickness, and FLEX construction as described in the SAP data, aligning well with cabinet and casework edge finishing. The 300FT roll length in the SAP description supports extended production without frequent material changes, which suits professional shops and serious woodworkers processing multiple components. For projects that specify the CP21177 EMB LAC finish combination recorded in the SAP description, this Rehau PVC edgebanding offers a repeatable reference that ties directly to prior work and future reorders.
Sold In: 1 Roll