Rehau PVC edgebanding 302597-177 is a PVC edge banding from Rehau, Inc. that covers and protects exposed substrate edges on panels and components. The SAP description 1-5/16X3MM FLEX CP21015 EMB LAC 300FT identifies a flexible PVC edgeband that is 1-5/16 inches wide and 3mm thick, so it is sized for edging workpieces that need that width and thickness in one pass. The 300FT length gives a continuous run suited to production or repeat jobs, reducing stops to reload material. The FLEX designation signals a flexible profile that follows normal panel contours more easily than a rigid strip, supporting smoother application around standard cabinet or furniture layouts where minor variations are common.
This Rehau PVC edge banding is specified as 1-5/16X3MM in the SAP description, so it is designed to match edges that call for 1-5/16 inch wide, 3mm thick banding during layout and machining. Using an edgeband cut to that size lets installers align the band with the panel edge while relying on only light trimming where required by the tooling setup. The FLEX CP21015 description identifies a flexible PVC formulation, which supports feeding the band through standard edge-banding processes along cabinet or furniture components where normal straight-line application is needed. The 300FT length supports continuous runs, which fits well when planning installation sequences on multiple parts using the same banding.
This Rehau PVC edgebanding, identified in the SAP description as 1-5/16X3MM, fits edge conditions that are laid out for 1-5/16 inch wide tape with a 3mm finished thickness. On panels cut and prepared for that edge dimension, the band covers the full edge height, so installers can align the band flush to the reference face and trim the opposite side, supporting consistent reveals across a run of cabinets or fixtures. The PVC construction makes the band appropriate for edges on wood-based panel products where a PVC finish is specified, aligning with common cabinet and furniture panel builds. Because the 300FT length is supplied as a continuous run, the same edgeband size and appearance can be carried across multiple cabinet boxes or component sets that share that specification.
The FLEX CP21015 designation in the SAP description indicates a flexible PVC band, which matters when feeding the material through edge-banding equipment set up for standard straight passes on cabinet parts. This flexibility lets the band conform to normal machining tolerances along the panel edge, so the adhesive line and contact area can stay consistent as parts move through the process. For shops standardizing on 3mm PVC edges, having this specific Rehau 302597-177 band with its defined width and thickness supports repeatable setups, since tooling and guides can be dialed in to that dimension and reused whenever this band is pulled from stock.
The manufacturer part number 302597-177 ties directly to the SAP description 1-5/16X3MM FLEX CP21015 EMB LAC 300FT, so every reorder of this part brings the same 1-5/16 inch width, 3mm thickness, flexible PVC formulation, and 300FT run length. That consistency supports repeatable edging setups on machines that are dialed to those dimensions, helping shops maintain the same edge profile from job to job where that band is specified. Using a clearly identified Rehau PVC edge banding part also simplifies matching existing work, because the same part number can be referenced whenever an additional run with the same edge size and appearance is required. For installers and fabricators working within standardized panel programs, those fixed details let the band slot into existing cutlists and machining routines that expect 3mm PVC edgebanding at 1-5/16 inches wide.
The FLEX notation within the description signals a flexible edge band rather than a rigid profile, which supports smoother feeding along cabinet sides, shelves, or furniture components handled in typical edgebanding workflows. That flexibility can help the band track cleanly along normal edge variations produced during cutting and machining. The full 300FT length gives enough material for multiple cabinets or component sets using the same edge detail, so shops can plan runs knowing this one Rehau PVC edgebanding 302597-177 roll will carry a consistent edge appearance across those parts.
Rehau PVC edgebanding 302597-177 is identified as 1-5/16X3MM, meaning it is 1-5/16 inches wide and 3mm thick, which fits edge designs calling for that width and thickness.
The FLEX CP21015 notation in the SAP description indicates a flexible PVC band, which supports smooth feeding along standard straight edges in typical edgebanding processes.
The SAP description lists 300FT, so this Rehau 302597-177 PVC edgeband provides a 300 foot continuous run suited to multiple panels sharing the same edge detail.
This edge banding is identified by manufacturer part number 302597-177 and the SAP description 1-5/16X3MM FLEX CP21015 EMB LAC 300FT, which together define its size and format.
The 3mm thickness suits projects and panel programs that call for a 3mm edge profile, supporting a defined edge line where that thickness is part of the specification.
This 1-5/16 inch wide Rehau PVC edgebanding matches edge designs laid out for that width, helping align the band with panels sized for a 1-5/16 inch edge.
Choose Rehau PVC edgebanding 302597-177 when a 1-5/16 inch wide, 3mm thick flexible PVC edge band is specified on your panels. The clearly defined SAP description 1-5/16X3MM FLEX CP21015 EMB LAC 300FT and the 302597-177 part number keep this band easy to match to drawings and repeat work. The 300FT continuous length supports runs of cabinets or components needing the same 3mm PVC edge profile, so this single Rehau PVC edge banding part can serve as the standard for that edge size in your shop.
Sold In: 1 Roll