Rehau PVC edgebanding 302597-179 is a PVC edge banding designed to cover and protect exposed panel edges, so cabinet, furniture, or fixture projects present a finished edge instead of raw core. The 1-5/16 inch width gives coverage for common panel thicknesses plus overhang, which supports trimming and flushing without exposing substrate. The 3mm thickness creates a substantial edge profile that can handle outside corners and everyday contact on working surfaces. The flexible construction helps the material follow straight runs or gentle curves, so long edges and returns can be banded with the same product. The CP20956 designation identifies the specific decor or match, supporting visual continuity across multiple components. The embossed lacquer surface noted in the description is designed to provide a textured, coated finish, so the banding can visually coordinate with matched laminates or surfaces.
This Rehau PVC edgebanding uses a 1-5/16 inch width, which gives installers working room to align the banding, apply it along the edge, and trim both sides while still fully covering the panel edge. The 3mm thickness supports common edgebanding equipment settings, so trimmers and flush cutters can be dialed in to produce a consistent edge profile from part to part. The flexible nature of this PVC material assists in feeding the strip through typical banding setups, keeping it stable as it moves across straights and mild curves. The 300FT roll length supports longer continuous runs on casework or furniture components before a roll change, which helps keep an installation or production sequence moving without frequent resets.
This Rehau, Inc. PVC edge banding sits in the edgebanding category, so it is suited for covering raw edges on panels used in cabinets, furniture, and other woodworking projects handled by shops or serious DIY users. The 1-5/16 inch width and 3mm thickness make it suitable for panel constructions where a thicker, more substantial edge detail is preferred, such as door fronts or exposed case edges. The CP20956 designation combined with the embossed lacquer description positions this banding for projects using boards or surfaces designed to match that decor series, so doors, drawer fronts, and carcass edges can share the same visual treatment. The 300FT length is well aligned with runs where multiple components must share the same banding, supporting color and texture continuity across an entire installation.
The 1-5/16 inch by 3mm dimension creates a workable combination of width and thickness, giving installers enough excess material for trimming while maintaining a durable edge profile, which reduces the chance of exposing core material after machining. The flexible PVC construction described helps the strip conform smoothly to panel edges during application, so adhesive contact and pressure can be applied more evenly across the full length of the run. The embossed lacquer surface noted in the product description delivers a specific texture and finish, which helps projects maintain a consistent look when banding is matched to CP20956-related boards. The 300FT roll length also contributes to repeatable results by allowing long or multiple runs of identical material from the same roll, which keeps edge appearance and sheen consistent from piece to piece in a project.
Rehau PVC edgebanding 302597-179 is described as 1-5/16 inches wide by 3mm thick, giving a wide, substantial edge that supports trimming and provides a solid edge profile on panel projects.
This edgebanding is described as flexible, so it can follow straight runs and mild curves, helping installers maintain continuous coverage along cabinet or furniture edges during application.
The 300FT roll length allows longer or multiple panel runs to be edged from a single roll, which supports consistent appearance and reduces interruptions during production work.
The CP20956 embossed lacquer description identifies a specific decor with a textured, coated surface, helping shops coordinate this banding with matching embossed or lacquered board finishes.
The 3mm thickness gives a thicker PVC edge that supports common trimming and profiling operations, providing a more substantial edge detail on doors, fronts, or exposed casework edges.
Rehau PVC edgebanding 302597-179 is offered by Wurth Baer Supply, a specialty wholesale distributor serving the woodworking industry with edgebanding and related materials.
This Rehau PVC edgebanding, identified as manufacturer part 302597-179, provides a 1-5/16 inch by 3mm flexible strip with an embossed lacquer surface tailored to the CP20956 decor. For cabinet, furniture, or casework runs where exposed panel edges need a coordinated, substantial PVC edge, this 300FT roll from Wurth Baer Supply supports consistent appearance and workflow across multiple parts.
Sold In: 1 Roll