Rehau PVC Edgebanding 302597-180 For Clean Edges

Rehau PVC edgebanding 302597-180 is a PVC edge banding from Rehau, Inc. that covers and protects exposed panel edges, giving cabinet and furniture parts a finished look that holds up in regular woodworking use. The SAP description "1-5/16X3MM FLEX CP20761 EMB LAC 300FT" identifies a flexible strip that is 1-5/16 inches wide and 3mm thick, so it matches panels needing that coverage without overhang waste. The 300FT length in the description points to a continuous run suited to shop batches, so long cabinet or shelving jobs can be handled from a single roll. The FLEX notation describes material that bends with the edge rather than fighting it, helping edges stay tight around gentle curves and straight sections. The CP20761 EMB LAC reference ties the banding to a specific finish and texture family, supporting appearance consistency across multiple parts.

Key Rehau PVC Edgebanding Details For Projects

• The Rehau PVC edgebanding 302597-180 product name ties this banding to a defined Rehau, Inc. line, so repeated orders match the same material and finish for ongoing cabinet or furniture runs.
• The edge banding category sets this as a dedicated solution for finishing raw board edges, turning cut sheet goods into parts that look complete and protect the core from everyday contact.
• The 1-5/16 inch width in the SAP description gives extra coverage over common panel thicknesses, allowing trimming back to a crisp line without exposing the substrate.
• The 3mm thickness called out in the SAP description creates a more substantial edge profile than thin tape, which helps edges read as solid and stand up to frequent handling in use.
• The FLEX notation in the SAP description indicates a flexible PVC construction that conforms to straight edges and gentle curves, helping reduce stress at corners and along long runs.
• The 300FT length in the SAP description supports longer production runs or multiple smaller jobs from one roll, which keeps edge color and texture consistent across many parts.

Edgebanding Dimensions And Handling On The Bench

The 1-5/16 inch width in the SAP description gives enough overhang on both faces of typical sheet goods, so installers can trim back to clean lines without chasing slight panel variations. The 3mm thickness provides a solid-feeling edge profile that pairs well with cabinet and furniture panels where a more substantial edge detail is preferred. The FLEX designation signals a bendable PVC material that follows panel edges with less risk of spring-back, supporting a more uniform bond along the length. The 300FT length in the SAP description supplies a continuous strip long enough for tall cabinet sides, long shelves, or multiple doors in sequence, which helps keep seams off visible areas. The edge banding product class confirms that this strip is intended specifically for closing off exposed edges on wood-based panels in woodworking projects.

Using Rehau 302597-180 Edgebanding In Workflows

Where This Rehau PVC Edgebanding Fits Best

The product class as edge banding places Rehau PVC edgebanding 302597-180 in cabinet, furniture, and general woodworking workflows wherever cut panel edges need to be finished. The 1-5/16 inch width works with common panel sizes that fall under that coverage, so one dimension can cover multiple panel thicknesses and still be trimmed flush. With a 3mm thickness stated in the SAP description, this PVC banding suits applications where a more pronounced edge is desired, giving doors, drawer fronts, or shelves a heavier visual line. The FLEX notation makes this strip suitable for straight runs and mild curves, so one material can serve different parts on the same job. The CP20761 EMB LAC reference describes a specific Rehau finish and embossed lacquer family, helping maintain color and surface continuity across related components in the same installation.

Details That Support Consistent Edgebanding Results

The manufacturer part number 302597-180 provides a precise identifier, so when the same number is used again the banding will match earlier work in size and finish, which is important on multi-phase projects. The 1-5/16X3MM dimensions in the SAP description define both coverage and build of the edge, letting installers standardize machine setups and trimming settings for repeat jobs using this banding. FLEX in the SAP description indicates that the PVC composition is designed to flex during handling, so it can be guided around edges with controlled pressure, supporting even adhesion along long cabinet parts. The 300FT length gives predictable yield per roll, so shops can plan how many edges or parts can be processed before switching rolls, maintaining work rhythm at the edgebander or bench. Identification of the product as Rehau PVC edge banding from Rehau, Inc. connects it to a recognized edgebanding manufacturer, supporting confidence that matching finishes can be specified across additional Rehau banding profiles when needed.

Common Questions About Rehau PVC Edgebanding 302597-180

Selecting Rehau 302597-180 For Edge Finishing

Rehau PVC edgebanding 302597-180 from Rehau, Inc. pairs a 1-5/16 inch width with a 3mm thick FLEX PVC profile, giving cabinet and woodworking shops a defined size and material for finishing exposed panel edges. The CP20761 EMB LAC and 300FT details in the SAP description identify a specific finish and continuous roll length that support consistent appearance across multiple parts and extended runs. For projects built around these dimensions and finish requirements, this Rehau PVC edge banding provides a clearly identified option that aligns panel coverage, edge build, and run length on the bench.